Markfletcher007
Achiever
- Joined
- Aug 28, 2012
- Messages
- 4,156
Today I successfully taught myself how not to punch carts, now I had previously purchased Pre punctured carts and had decided I could do myself!!
Now I have a list of things that you should not use as I used these to my dismay
Vice
Hammer
Nail
Pliers
I put the first carto into the vice and tightened up, but more, just a bit more..wait my perfectly cylindrical cart was now like a pancake, hmmm the vice technique does not work.
Ok get another cart, right measure it against the tank, pushed it in and gauged the distance, ok let's get it out, bit tight, I know grab the thread end with pliers and pull, like a cork out a bottle success !! Not quite the 2nd cart had a flat damaged that end from the pliers!!!
Grab the 3rd cart (is this why they pack them in 5's for idiots like me!!) ok don't Put in the vice, measure on the outside of the tank, ok hold on bench, hold nail and hit with hammer...what could do wrong, well as the nail slipped off the cart and the cart ricocheted around the shed like a scene from a gunfight I suppose it could have been worse.
4th cart was a success though and used the nail and hammer method all be it with a lot more care and attention, not bad for a first well 4th attempt!!
Ok the moral of this newb approach to Vaping, buy Pre punctured cartos or better still buy a carto puncher you can get them from under a tenner which ironically probably cost less than my failed attempts to put a hole in one cart.
Again not my brightest moment, don't forget I do these stupid things so you don't have to, again please don't think any less of me and happy Vaping
Now I have a list of things that you should not use as I used these to my dismay
Vice
Hammer
Nail
Pliers
I put the first carto into the vice and tightened up, but more, just a bit more..wait my perfectly cylindrical cart was now like a pancake, hmmm the vice technique does not work.
Ok get another cart, right measure it against the tank, pushed it in and gauged the distance, ok let's get it out, bit tight, I know grab the thread end with pliers and pull, like a cork out a bottle success !! Not quite the 2nd cart had a flat damaged that end from the pliers!!!
Grab the 3rd cart (is this why they pack them in 5's for idiots like me!!) ok don't Put in the vice, measure on the outside of the tank, ok hold on bench, hold nail and hit with hammer...what could do wrong, well as the nail slipped off the cart and the cart ricocheted around the shed like a scene from a gunfight I suppose it could have been worse.
4th cart was a success though and used the nail and hammer method all be it with a lot more care and attention, not bad for a first well 4th attempt!!
Ok the moral of this newb approach to Vaping, buy Pre punctured cartos or better still buy a carto puncher you can get them from under a tenner which ironically probably cost less than my failed attempts to put a hole in one cart.
Again not my brightest moment, don't forget I do these stupid things so you don't have to, again please don't think any less of me and happy Vaping