Coil advice for hadaly please...

[Screwball]

Cheers for all the advice.
Looked at stealth vapes and doesn't have 24 or 25 brochrome so I'll have a look round.
I'll have a go on the hadaly when it gets here with regards to the drip tip, it's going on a squeeze so I would imagine it shouldn't get to hot providing I don't put a super low build in it

 

[eyeball kid]

Cheers for all the advice.
Looked at stealth vapes and doesn't have 24 or 25 brochrome so I'll have a look round.
I'll have a go on the hadaly when it gets here with regards to the drip tip, it's going on a squeeze so I would imagine it shouldn't get to hot providing I don't put a super low build in it

Bud if you have kanthal I'm guessing 26-28awg. A 3mm single coil about 0.5 ohms will still blow you away. It's such a good rda. I've had the aforementioned coil in it and it's great and doesn't get silly hot. I've just popped pretty much the same coil in made from 26 awg nichrome for faster ramp up and a little more surface area and it's even better. Simple coils absolutely shine in the hadaly.

 

[Screwball]

Bud if you have kanthal I'm guessing 26-28awg. A 3mm single coil about 0.5 ohms will still blow you away. It's such a good rda. I've had the aforementioned coil in it and it's great and doesn't get silly hot. I've just popped pretty much the same coil in made from 26 awg nichrome for faster ramp up and a little more surface area and it's even better. Simple coils absolutely shine in the hadaly.

I shall give it a go, might end up having ordered some wire before it turns up anyway

 

[eyeball kid]

I shall give it a go, might end up having ordered some wire before it turns up anyway

Yeah have a play. But it's a small chamber and doesn't need too big of a coil. I save the captons for the goon, Kennedy and tsunami.

 

[westy]

I've been useing a fused Clapton in it for about a week but had issues with it getting fucking hot and burning my lips....I've put a simple 28awg Clapton comeing out at 0.67ohm and its bloody good

 

[red5]

Just out of interest whilst we're on the hadaly, does anyone know if the official delrin/ultem top caps fit on the Sxk version as I think hell might freeze over before clone versions get released.

 

[stevoknevo]

I'm using my SXK clone on a dripbox which has a 3.7v fixed output - fitted a twisted 24awg 3mm id Ni80 build coming in at 0.2 and it rocks, doesn't get overly hot either.

 

[jayswift]

I've been useing a fused Clapton in it for about a week but had issues with it getting fucking hot and burning my lips....I've put a simple 28awg Clapton comeing out at 0.67ohm and its bloody good

I just mine today and tried a couple different builds. Ended with the same coil and its awesome!!!

 

[jayswift]

Just out of interest whilst we're on the hadaly, does anyone know if the official delrin/ultem top caps fit on the Sxk version as I think hell might freeze over before clone versions get released.

Was thinking if they fit the SXk also????

 

[dg109]

Hadaly I use daily... If its the authentic you need the derlin or ultem cap as well for this set up as it gets pretty hot
Alien , 5 wraps , Ni80 26/36g 3mm id. Immense flavour. @dg109 now runs this exact set up and is happy...He may add furthur comments..
With the derlin or ultem there is no problem.... with the standard cap gets too hot but its by far the best set up Ive tried in the Hadaly

This is an amazing set up - you'll love it.