Custom Made Or Other??

[valtonio]

Hi guys,

Would be very interested in getting a custom box mod made or buying the likes of the lost vape therion 75.

I never vape over 70 watt so I'm thinking anything over that is probably overkill.

I'm looking something which has a great fit & finish and looks something unique. As mentioned before I would ideally like a side firing bar similar to the likes of the Smok Alien.

Could you advise me on the best route to take?

I'm very happy with my baby beast tank and wouldn't be going down the rebuildable route due to my hand problems.

I would even be happy talking to a custom mod maker on here if there are any !

Thanks Anto

 

[ZeroBass87]

There are a few mod makers on the forum, best bet is to head over to the Advanced PV/Diy discovery sub forum and have a look in the Mod Making subsection... I can't link on my phone atm but it's easy enough to find. Hope this helps!

 

[crustyfolker]

@valtonio remember just because you only use upto 70w its always good to have some headroom. 1 because you may want to use more wattage in time or you will find a say 80w mod will only give you the 80 watts for a shortish time before you need to lower the wattage for the device to cope as the battery starts to rundown before it needs a recharge.
You can pick up a decent 200 watt mod for not much more or even less than a 80 watt mod.
If you want something thats different to what most have then you are talking about getting a custom built mod which will cost more due to being made on a smaller scale unlike mass produced stuff thats way cheaper to buy.

 

[valtonio]

@valtonio remember just because you only use upto 70w its always good to have some headroom. 1 because you may want to use more wattage in time or you will find a say 80w mod will only give you the 80 watts for a shortish time before you need to lower the wattage for the device to cope as the battery starts to rundown before it needs a recharge.
You can pick up a decent 200 watt mod for not much more or even less than a 80 watt mod.
If you want something thats different to what most have then you are talking about getting a custom built mod which will cost more due to being made on a smaller scale unlike mass produced stuff thats way cheaper to buy.

Thanks for the informative reply. I would seriously consider a custom made mod as I love my gadgets and also something different! Can you recommend the best way to get the ball rolling in terms of a custom mode? Thanks

 

[Miss Pepper]

Thanks for the informative reply. I would seriously consider a custom made mod as I love my gadgets and also something different! Can you recommend the best way to get the ball rolling in terms of a custom mode? Thanks

Have a chat with @windows

 

[valtonio]

Have a chat with @windows

Hi sorry for the stupid question how do I go about contacting @ windows

 

[Jugg1es]

Hi sorry for the stupid question how do I go about contacting @ windows

Pm him on here or visit his fb page
https://www.facebook.com/Custom-Built-Mods-by-Windows-159630987743579/

 

[pfvapes]

@m-vapes

 

[eyeball kid]

@m-vapes

Second for m vapes. Just for info. He is releasing some DNA 200 squonkers in Feb.

 

[Rob]

Thanks to the EXTREME generosity of a certain Chap in Serbia, I am now "beginning" to have a gentle think about commissioning one of our wonderful UK Builders.
Dejan from Limelight Mechanics sent me a replacement Lipo Battery for my Box Reborn. Because Batteries and postage can be somewhat tortuous, he decided to disguise the battery a bit. How did he do that you may ask? Well......... he sent it in a Limelight "Box" (DNA40) Casing without all the internals, but with a pair of Stone Panels fitted
I have been in touch and asked whether he'd like it returned, to be told that it was a gift.

So........... thus far 3 people come to mind, but I am only just starting this process, so suggestions will be welcomed. I am gathering that a DNA75 Chip would almost certainly fit.