Digiflavor Espresso coil rebuild?

[Crewella]

These are the OP's pics:

 

[Crewella]

......... does anyone else think the MTL clapton wire (as Vandy Vape does) might work?

 

[mattyk2010]

......... does anyone else think the MTL clapton wire (as Vandy Vape does) might work?

I did at first but he will never get near .5 ohm with it if thats a 3mm dia so i thought 5 wraps of this would be perfect

https://www.wireandstuff.co.uk/prod...Double-Wrap---5-Metre-Spool-1307.html#SID=187

 

[Crewella]

I did at first but he will never get near .5 ohm with it if thats a 3mm dia so i thought 5 wraps of this would be perfect

https://www.wireandstuff.co.uk/prod...Double-Wrap---5-Metre-Spool-1307.html#SID=187

Never ask an MTL vaper about sub-ohm ....... thanks!

 

[LionessVaporess]

Why not Crewella? I am an MTL vaper and sub ohm is all I've ever done. Of course I'm new to this, and that's what the guy at the store sold me when I asked what was popular....

 

[Crewella]

Why not Crewella? I am an MTL vaper and sub ohm is all I've ever done. Of course I'm new to this, and that's what the guy at the store sold me when I asked what was popular....

It's about how much wire (how many wraps) you need of each kind of wire to hit your target resistance (0.5 ohms). I don't much use clapton wires so bow to superior knowledge.

 

[LionessVaporess]

It's about how much wire (how many wraps) you need of each kind of wire to hit your target resistance (0.5 ohms). I don't much use clapton wires so bow to superior knowledge.

I know, I've been having a hard time wrapping my head around all of the specifics. Though I understand ohms law, and I have all the calculators to figure it out, I have been very grateful of Matty's help and advice.

 

[LionessVaporess]

I just want to say THANK YOU mattyk2010 if this works out for me, I owe a lot of the credit to you for helping me with the calculations. As soon as I can get the wire, I'm gonna give it a try. Fingers crossed. I'll let you know how it goes.

 

[mattyk2010]

I just want to say THANK YOU mattyk2010 if this works out for me, I owe a lot of the credit to you for helping me with the calculations. As soon as I can get the wire, I'm gonna give it a try. Fingers crossed. I'll let you know how it goes.

You don't need to thank me thats why where all here [emoji4] and any problems with your build tag me on here or PM me and ill try help [emoji4]

 

[zouzounaki]

It seems like an odd tank, if it is supposed to be rebuildable. I don’t get the advantage of a rebuildable tank with replaceable coil heads, over just making like other rebuildable tanks with a fixed deck with screws. Why would you buy new coil heads?

I suppose it’s bit like the little rebuildable rba things with the rubber seal you used to get for the eleaf tanks.