How To eleaf lemo 2 mod to allow better juice flow and wicking

[shaunhoop1981]

This is what I wasn't doing

 

[eyeball]

I found that if I tighten the tank too much the oring at the bottom blocks the juice holes.


Sent from my iPhone using Planet of the Vapes

 

[nuck]

I like the tank on tight. Finding the same thing as eyeball. Not very consistent. Seems to be a lot of variables involved. Squished o-ring, type and method of wicking, coil build, thickness of juice. My last build was with nichrome instead of kanthal (I don't know if this is making a difference - it's a larger, loose coil with 7 wraps & settled to .6 ohms), lots of Japanese cotton and poking a path through the cotton to the air hole. I run a thicker juice. So far so good. A little bit of popping.

I really like the Lemo 2 though. Great taste & air flow. Can't beat the convenience of the side fill hole. The deck is easy to build on.

Hows the extra grooves on the atomizer tube working out for you shaunhoop1981? I'ld love an update on that. Any regrets? I'm really considering doing the same.

 

[shaunhoop1981]

I will add some more pictures as I have now modified further now regardless of wicking method I have it perfect for me I can go as tight as I like with glass and as much wick as I wish I admit I'm getting better results with loose wound coil though

 

[beeb]

Is it possible to see the pics of your modifications ? Am interested in doing this

 

[shaunhoop1981]

I will post tomorrow for you

 

[kle650]

Might try cotton bacon I have machined a spare sleeve just in case it didn't work but I tried all wicking techniques I could find and still odd dry hit

Was having the same problem and found mention of Cotton Bacon. Bought version 2. Hurried can't be bothered re wick thinking it wouldn't work. It ain't had a dry wick since. No mod required.

 

[shaunhoop1981]

Here are the pics as promised

 

[beeb]

Great !!!

 

[sganatra]

Can open the bloody fill port on mine. Any tips on loosening it up?