What's new

evod disappointment :-(

kriskent

Postman
Joined
Mar 31, 2013
Messages
325
Hi guys received my evod this morning and Im gutted, filled it up and attached it to my battery but its like vaping air! There is a gap between the evod and battery, i put tape round it and was so much better but this can't be a long term solution cos its just impracticable. Is my only solution to get the evod battery?
I bought the one with one extra coil head to see if i liked it before i buy the kit, the kit in the long run would be a better buy cos my batteries would need replacing some point anyway.
Any suggestions how i can get it to work better for me to see if i like it before splashing out?
 
Hmmm... Make sure the head of the evod is screwed in to the base of the evod properly, you should be ok with that battery, the evods are a bit airy though
 
I'm still using the Kanger MT3's which can sometimes have the same issue.....

....I'm also still using Whit77's previous suggestion of a tiny bit of blue tac to cover one of the vent holes as well, much better :).
 
Thanks for your responses guys, i even tried a elastic band just at the base which did work but could taste it uch a fi! It just isn't flush with the battery :-( so it way to vented if you get what i mean.
Lol at blue tac Arctic_Wolf
 
Also it wont be very good on a 2.5ohm head if it has one fitted. try it again on a 1.8ohm head.
 
I thought the T3 was airy but not so much the eVod and it worked fine with a standard eGo battery. Maybe worth trying a different head or rebuilding it. It's all I have used really for the last couple of months, still love it but I use an iTaste battery now on 3.7v.
 
Its the standard head which i think is a 2.5 maybe a lower resistance would help but i think its gonna be a new battery cos its just not flush so there is just too much air getting through from underneath :-(
 
Back
Top Bottom