filling a kanger tec pro 2 minitank

[sworth24]

is there an easy way to do this. i'm getting loads of spillage as the holes are really small and the liquid nozzle doen't fit in. probably just me being stupid. but is there an easier way

thanks,

 

[Waspy]

Yes there is.

Get a needle-tip bottle, most vendors sell them.

 

[whipitup]

You are turning it upside down, taking the base off and filling from there?

 

[Ninjaassasin1983]

needle bottles are a good bet http://www.ebay.co.uk/itm/like/2712...ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95&ff19=0

 

[Mostly]

You really shouldn't need any device for filling a mini protank, upside down pointing at 8 o'clock and gently squeeze against the side wall

 

[oska]

It's not the easiest with a normal bottle but you just let it run down the outer inside edge.
http://www.healthcabin.net/helpdesk/knowledgebase.php?article=322

 

[Vapeable]

Is it a genuine product? I've seen mini protank clones that have tiny little holes that you have no chance of filling without a needle nose bottle.
If it's a genuine one you shouldn't have a problem. just tilt to one side and fill.

 

[sworth24]

the tip of letting it run down the side worked perfectly. think it's clone to be honest. still decent enough for the moment though like.
cheers for the help.