first squonker and i built it... sort of

[dismal_fett]

Awesome dude! I'm now want to build my first squonk mod. Was looking around where to grab a bf 510 connector Lmao!

if you're happy using a mech and don't mind a bit of work with some tin snips and sandpaper these are a top way to go. been a week since i put this together and i've used nothing else since and see no reason to go back to tanks or dripping.

modmaker is definitely your friend for squonk parts.

my tips for putting one of these together if you're interested, make sure you sand at least the front facing edge of your copper so it doesn't snag your battery wraps. put a dimple in both contacts where they'll meet your battery, i used the 0 from a set of alphabet stamps but i've heard a rounded off 3ml drill bit works a treat n'all (@nerzz ). screw your favourite atty on the 510 before you fasten it down as you get to set where the airflow will end up, i like mine not to be pointing directly up my nose and into my beard during use, and it also will show you where the positive contact will land on the 510 as this moves with the adjustment for your 510.

 

[Bardiel003]

if you're happy using a mech and don't mind a bit of work with some tin snips and sandpaper these are a top way to go. been a week since i put this together and i've used nothing else since and see no reason to go back to tanks or dripping.

modmaker is definitely your friend for squonk parts.

my tips for putting one of these together if you're interested, make sure you sand at least the front facing edge of your copper so it doesn't snag your battery wraps. put a dimple in both contacts where they'll meet your battery, i used the 0 from a set of alphabet stamps but i've heard a rounded off 3ml drill bit works a treat n'all (@nerzz ). screw your favourite atty on the 510 before you fasten it down as you get to set where the airflow will end up, i like mine not to be pointing directly up my nose and into my beard during use, and it also will show you where the positive contact will land on the 510 as this moves with the adjustment for your 510.

Kinda the reason why I (unfortunately) collect rda/rdta Lmao! Like the build and tinker. Atm still in the process to work on the 3d printing of the casing. I figured I would put the firing button on 1 side, while squonking be on the other side (rather use the large surface areas). Working on making it rounded for nice feel to hold and squonking to it. Then have one side of the larger surfaces to be venting for the battery.