Greetings from Hertfordshire

[HAZZA1962]

Hello @SludgeVanDiesel , Nice to meet you mate !!! I've still got my Hammer Mod in Mothballs somewhere !!!

 

[Mr Ripple]

Hi and welcome

 

[Rudi]

Hi and welcome.....you have a nice collection there....

 

[Kaktai]

Greetings and Welcome to POTV

 

[SludgeVanDiesel]

Thanks for the warm welcome folks

Wow, welcome and what a collection I never even knew these pipes existed. How cool

There's loads of them out there. With the exception of the swirly looking one at the top, that lot are all off the shelf models. I intend future purchases to be mainly one off hand made, or converted tobacco pipes (not that there's anything wrong with any of my mass produced pipes, but I prefer my more original looking ones, newest acquisition in the photo below)

Hi and welcome. 9 years vaping. Think you'll be helping me rather than the other way round

Part of the reason I frequent vaping forums is I find that I'm still learning even now, but if there's anything I can answer about e-pipes, I'm happy to help.

& to the Planet SludgeVanDiesel!

Nice collection of pipes! I think I can recognise one or two of them in the photo. You could well be someone to have a chinwag with sometime, cos I've got a Kamry K1000 Plus..fitted with a Nautilus Mini tank..and I absolutely love tooting that. My brother now calls me Sherlock or Pop Eye! I'm aiming to be acquiring a couple more in time.

There's another epipe tooting member in here, who I ought to introduce you to, so I'll tag her here @Crewella . as she advised me with getting the Kamry.

Have you seen the Nex 11 per chance? Now that's is an epipe! lol!
I've only been vaping a few weeks to date..so I've a long road ahead of me, but enjoying the experience..and it's keeping me off the dreaded ciggys.
So look forward to seeing you about in here!

Nice to make your acquaintance SVD.

Thanks, in the photo are a converted tobacco pipe (known as Balthazar) with Nautilus 1, an EPuffer 609 with a 510 to 510 extender & Nautilus Mini, EPuffer 629 with Vivi Nova tank (I no longer have this one, I was a bit careless & managed to knacker the electrics. It has since had a new lease of life as I sent it to the chap who converted Balthazar as it was no further use to me. It's now a manual & has a new owner ), EPuffer 629 v2, TECC e-pipe II, Epuffer 605 marble effect & a Tobecco Hammer with Nautilus Mini. I also had another e-pipe II, a 601 another 609 & another (clone I believe) Hammer, but these were stolen from my van.

How are you getting on with the K1000+? I know a lot of folks have had issues with them, although you can't go wrong with a N mini.

I saw Todd's review of thw Nex II. Wow! That's a pipe & a half! Not particularly my cup of tea, but wow!

Hello @SludgeVanDiesel , Nice to meet you mate !!! I've still got my Hammer Mod in Mothballs somewhere !!!

I love mine. It's proven to be practically indestructible too, even when dropped from a great height.

As promised above, here's my newest baby (Melchior, once I've found something suitable my next one will be the final wise man Caspar)

 

[GrumpyOldWoman]

Hiya and welcome to PoTV

 

[BULLDOG1964]

and to the planet..

 

[Jackymax]

Thanks for the warm welcome folks



There's loads of them out there. With the exception of the swirly looking one at the top, that lot are all off the shelf models. I intend future purchases to be mainly one off hand made, or converted tobacco pipes (not that there's anything wrong with any of my mass produced pipes, but I prefer my more original looking ones, newest acquisition in the photo below)



Part of the reason I frequent vaping forums is I find that I'm still learning even now, but if there's anything I can answer about e-pipes, I'm happy to help.


Thanks, in the photo are a converted tobacco pipe (known as Balthazar) with Nautilus 1, an EPuffer 609 with a 510 to 510 extender & Nautilus Mini, EPuffer 629 with Vivi Nova tank (I no longer have this one, I was a bit careless & managed to knacker the electrics. It has since had a new lease of life as I sent it to the chap who converted Balthazar as it was no further use to me. It's now a manual & has a new owner ), EPuffer 629 v2, TECC e-pipe II, Epuffer 605 marble effect & a Tobecco Hammer with Nautilus Mini. I also had another e-pipe II, a 601 another 609 & another (clone I believe) Hammer, but these were stolen from my van.

How are you getting on with the K1000+? I know a lot of folks have had issues with them, although you can't go wrong with a N mini.

I saw Todd's review of thw Nex II. Wow! That's a pipe & a half! Not particularly my cup of tea, but wow!

I love mine. It's proven to be practically indestructible too, even when dropped from a great height.

As promised above, here's my newest baby (Melchior, once I've found something suitable my next one will be the final wise man Caspar)View attachment 157047

I've not learned how to reply to multi quotes yet, except by accident lol.

 

[Deaf Vaper]

Thanks for the warm welcome folks



There's loads of them out there. With the exception of the swirly looking one at the top, that lot are all off the shelf models. I intend future purchases to be mainly one off hand made, or converted tobacco pipes (not that there's anything wrong with any of my mass produced pipes, but I prefer my more original looking ones, newest acquisition in the photo below)



Part of the reason I frequent vaping forums is I find that I'm still learning even now, but if there's anything I can answer about e-pipes, I'm happy to help.


Thanks, in the photo are a converted tobacco pipe (known as Balthazar) with Nautilus 1, an EPuffer 609 with a 510 to 510 extender & Nautilus Mini, EPuffer 629 with Vivi Nova tank (I no longer have this one, I was a bit careless & managed to knacker the electrics. It has since had a new lease of life as I sent it to the chap who converted Balthazar as it was no further use to me. It's now a manual & has a new owner ), EPuffer 629 v2, TECC e-pipe II, Epuffer 605 marble effect & a Tobecco Hammer with Nautilus Mini. I also had another e-pipe II, a 601 another 609 & another (clone I believe) Hammer, but these were stolen from my van.

How are you getting on with the K1000+? I know a lot of folks have had issues with them, although you can't go wrong with a N mini.

I saw Todd's review of thw Nex II. Wow! That's a pipe & a half! Not particularly my cup of tea, but wow!

I love mine. It's proven to be practically indestructible too, even when dropped from a great height.

As promised above, here's my newest baby (Melchior, once I've found something suitable my next one will be the final wise man Caspar)View attachment 157047

Great! I love it! The stock tank, which is MTL tank fitted with a .5 coil, wasn't much cop, so I swapped it with the Naut Mini..and that works just fine. I currently don't use the stem, so effectively, i'm just using the bowl at the moment! But I can get a about a day out of it, and a fair decent vapour production, with the standard Mini drip tip. The stem made it a bit too tight a draw for my liking. But I use it everyday, no issues with it so far. Crewella has a collection of the earlier K1000s and found that she didn't like the inconsistent voltage drain with those ones. The plus seems to have a better chip, keeping the power delivery more even now.

I considered getting an epuffer, but was warned off by a local vape shop vendor..who claimed that they were dangerous! I was aiming to get the 629 Deluxe box kit, but it is expensive for what you get in it. Did you get that one?

That hammer one looks cool...but can't but wonder how one is meant to 'stand' it with that pointed bottom! There's a small one in your photo at the bottom of the picture with a metal stem, what's that one called?

I have a real pipe which I hope to convert some day. It's a hand made one, made for me Dad in the 1960's out of a single piece of wood...never been fired. The bowl is big enough to take a 18650 maybe even a 20700. I'd be interested to know if you know where to get the parts to convert it from.

Here's a pic of it next to the little Kamry!

 

[Jackymax]

Great! I love it! The stock tank, which is MTL tank fitted with a .5 coil, wasn't much cop, so I swapped it with the Naut Mini..and that works just fine. I currently don't use the stem, so effectively, i'm just using the bowl at the moment! But I can get a about a day out of it, and a fair decent vapour production, with the standard Mini drip tip. The stem made it a bit too tight a draw for my liking. But I use it everyday, no issues with it so far. Crewella has a collection of the earlier K1000s and found that she didn't like the inconsistent voltage drain with those ones. The plus seems to have a better chip, keeping the power delivery more even now.

I considered getting an epuffer, but was warned off by a local vape shop vendor..who claimed that they were dangerous! I was aiming to get the 629 Deluxe box kit, but it is expensive for what you get in it. Did you get that one?

That hammer one looks cool...but can't but wonder how one is meant to 'stand' it with that pointed bottom! There's a small one in your photo at the bottom of the picture with a metal stem, what's that one called?

I have a real pipe which I hope to convert some day. It's a hand made one, made for me Dad in the 1960's out of a single piece of wood...never been fired. The bowl is big enough to take a 18650 maybe even a 20700. I'd be interested to know if you know where to get the parts to convert it from.

Here's a pic of it next to the little Kamry!

View attachment 157071

You sure you won't be destroying a valuable pipe there?