HELP, Please!!!!!

[Rob]

This goes out to any Pico Squeeze Users.
My SXK Narda won't make contact with the Mod's 510. Is there a way of adjusting the Pod's Pin, it needs to come up the 510 a bit.

Pretty Please!!!!!

 

[Lord Grim]

I hate to say this, I have three Narda clones (a mix of SKX and Coppervape) and one of them will only fire on my VT Inbox. The other two fire on anything.
Unfortunately, I can't use a process of elimination, as I have no idea at this point which one was made by who.

 

[Ment]

Using a very fine tipped screwdriver or similar that will fit down the side of the pin on the Pico, lever the pin upwards, working your way round.

This usually works until the RDA is removed and you have to do it again.

 

[killa_k]

Using a very fine tipped screwdriver or similar that will fit down the side of the pin on the Pico, lever the pin upwards, working your way round.

This usually works until the RDA is removed and you have to do it again.

I 2nd that!

 

[smplmind]

I have to do the screwdriver thing if I use my Serpent mini on a Wismec device which isn't spring loaded, otherwise other tanks don't make contact.

 

[gravystain]

Using a very fine tipped screwdriver or similar that will fit down the side of the pin on the Pico, lever the pin upwards, working your way round.

This usually works until the RDA is removed and you have to do it again.

Will have to try this later, have a few rda's that don't make contact on the squeeze, I just didn't think you could adjust it...

 

[paul-7]

This goes out to any Pico Squeeze Users.
My SXK Narda won't make contact with the Mod's 510. Is there a way of adjusting the Pod's Pin, it needs to come up the 510 a bit.

Pretty Please!!!!!

Don't know how to move the pico pin Me but I have a couple of Narda`s I could send over maybe they will fire ok

 

[eyeball kid]

I've a spare narda that's as good as gold on the squeeze guv. Just shout.

 

[Rob]

I'll have a play tomorrow and then get back to you chaps

 

[jules64]

@Rob
I had a similar problem and ended up pacing out the bf pin to get it too reach. See this thread:https://www.planetofthevapes.co.uk/...ads/squonk-newb-question.129597/#post-1408000
Good luck
Jules