I need help for wicking & setup for the HUSSAR II STM RBA KIT

AngryChainsaw · Jun 6, 2023

I'm totally new in the BORO [emoji195] HOLE, and I'm just learn how to properly wick MTL setup on the MONARCHY RBA KIT (THE LAST ONE EDITION), but this HUSSAR II STM RBA KIT with all air flow pin's options give me a lot of headache... I try like Todd's and Ryan in his YT reviews but it's leaking through the air flow pin's (the smallest one from 1mm). Where do I go wrong when I put the cotton in this RBA, the coil is pre-made FUSED CLAPTON MTL NI80 2.5mm ~ 0.9ohm?
Please any advice...

hack400 · Jun 6, 2023

Not sure I can help, but pictures of your build will help

AngryChainsaw · Jun 6, 2023

hack400 said:
Not sure I can help, but pictures of your build will help

Thanks mate, I will put all pictures tonight, I'm wrong somethings with cotton, less or more, I will put tonight ABOUT58PM by CEST all pictures of my setup, but maybe I don't know how is regular R4 (MISSION XV) BORO TANK's with a proper close with a glass on front, but I have CRYPT, LIMELIGHT, CTHULHU and VAPESNAIL BORO TANK, and I will try everything, but mistake is it my wicking, not on TANK for sure, because I use right now MONARCHY in Limelight BORO TANK in the KBR-S BORO MOD by PSYCHOMOD...

JohnNada · Jun 6, 2023

Pictures of the deck, with the coil and cotton

AngryChainsaw · Jun 6, 2023

JohnNada said:
Pictures of the deck, with the coil and cotton

Yes I know, but I'm now at work until 70M, I will be prepare with my tool, FUTON OHM TAB, coils, cotton's, HUSSAR II STM RBA KIT with 1mm and 1.2mm air flow pin's and with BORO TANK's...
Please mate, before that I will send you private message and I will buy to you online (in your country or pay to you via PayPal) just to help me to solve this puzzle with HUSSAR II STM RBA KIT for MTL and leaking issues with the same...
At 8 PM today I will put here all picture's 9f my setup... (now it's exactly 2:33PM at my time zone)...

JohnNada · Jun 6, 2023

AngryChainsaw said:
Yes I know, but I'm now at work until 70M, I will be prepare with my tool, FUTON OHM TAB, coils, cotton's, HUSSAR II STM RBA KIT with 1mm and 1.2mm air flow pin's and with BORO TANK's...
Please mate, before that I will send you private message and I will buy to you online (in your country or pay to you via PayPal) just to help me to solve this puzzle with HUSSAR II STM RBA KIT for MTL and leaking issues with the same...
At 8 PM today I will put here all picture's 9f my setup... (now it's exactly 2:33PM at my time zone)...

You don't need to send me anything bud

Post some pics once you get the chance we can see if we can help diagnose the problem. It's probably just a wicking issue.

AngryChainsaw · Jun 6, 2023

JohnNada said:
You don't need to send me anything bud

Post some pics once you get the chance we can see if we can help diagnose the problem. It's probably just a wicking issue.

I will do that ASAP... But not before 8PM and not after that time. Believe me, mate I was through out almost 29ml of Cavendish e-liquid on 18mg 50-50 with my trying to get a proper MTL setup with my new BORO RBA (HUSSAR II STM with all air flow pin's options)...
I will have to treat you with something if you help me with that, bud [emoji6] [emoji6] [emoji6]...

AngryChainsaw · Jun 9, 2023

This is how isn't work with MTL setup...
https://youtube.com/shorts/q7Cc3_aYjuU?feature=share4

LordOdin · Jun 9, 2023

AngryChainsaw said:
This is how isn't work with MTL setup...
https://youtube.com/shorts/q7Cc3_aYjuU?feature=share4

We can't see your build in the video, we need to see the deck and how you have positioned the coil and cotton, A video of your mod with boro tank in it is no use at all.

AngryChainsaw · Dec 5, 2023

LordOdin said:
We can't see your build in the video, we need to see the deck and how you have positioned the coil and cotton, A video of your mod with boro tank in it is no use at all.

I will show to you as I came to my home at afternoon if you're still here. Also I've bought SteamShell and Kayfun BB and need some suggestions for this BRIDGE's, I also love TANK's like as: VapeSnail TANK's, Limelight TANK's, CRYPT TANK's, but I bought a couple of new one from PRC (PEEK, BLACK and WHITE) which are not made by aluminum, but it's made of some kind of the delrin (plastic) and glass at the front of the panel's...
I'm just waiting for the new HOKO-E SKULLS by MODS CORPORATION & PENNYWISE by VOODOOLL and that will be enough for my first year at BORO [emoji195] HOLE...
And this is my new BORO MOD's and BORO accessories which I bought in meantime (after I ask help from you on this post):