I need some help with pnp & gtx coils please.?

[Trade.green]

Good evening,

Recently a good friend has decided to reduce the number of vape kits, mods etc. He done me a really good price on the 2 following devices ;

Vopoo e60 drag ( in box unused)

Vaporesso gen pt60 ( only lightly used)

I enjoy MTL & RDL. I normally vape 20mg nic salts.


Could you recommend a few good coils renowned for flavour & performance for each device.?
I would like to use both at different times in either mtl or rtl setup.


I know these 2 devices are very similar I just couldn't pass on them as I love them both.


I really appreciate you taking the time to read this and look forward to hearing from any of you that could help with decision making and educate me on these two branded coils.

aJ

 

[Cozy]

Good evening,

Recently a good friend has decided to reduce the number of vape kits, mods etc. He done me a really good price on the 2 following devices ;

Vopoo e60 drag ( in box unused)

Vaporesso gen pt60 ( only lightly used)

I enjoy MTL & RDL. I normally vape 20mg nic salts.


Could you recommend a few good coils renowned for flavour & performance for each device.?
I would like to use both at different times in either mtl or rtl setup.


I know these 2 devices are very similar I just couldn't pass on them as I love them both.


I really appreciate you taking the time to read this and look forward to hearing from any of you that could help with decision making and educate me on these two branded coils.

aJ

voopoo E60 gets supplied with a 0.2 and a 0.3 ohm coil which are predominantly for DTL vaping, though it says it takes the pnp type coils so for rdl you'd be looking at thehighest ohm coil possible and from a little looking you'd be looking for the vm4 0.6 coil for an RDL vape, again with the vaporesso gen pt60 you'd be looking at the gtx 0.6 or 0.8 for an RDL vape both these devices are more aimed to DTL vaping but as long as thes coils I have said above are compatable then you could use them for RDL vaping MTL you'd be looking at 1.0 ohm upwards which I cant see any option for those mods and tanks, I dont know if they have a 510 connection, if so then you could add a different tank to them and go MTL with something else, i have no knowledge of both devices though

 

[RAPTOREX]

For RDL and DTL, I’d dump the voodoo coils and move to the wotofo SMRT PnP. It’s rebuildable, that’s simplicity, itself to use.
The mesh is .2 ohms and gives fantastic flavour and cloud. They’re also incredible value, with 10 complete rebuilds for a maximum of £7.99. And the actual rebuildable set can be bought for as little as £4.99, but is most often £7.99

 

[MrDJ]

GTX coils do a mtl 1.2 and new mesh 1.2 but as said abouve for restricted the 0.8

ignore the bit on the right as this image was before your mod came out. im guessing a gtx coil is a gtx coil and will fit any tank that takes gtx.