I want to smoke at 5v because of all the vapor but ohm is only 1.8ohm

[crunchynut]

I have an aerotank mega, Nautilus aspire and iclear 16b

out of all of them its like, 1.8ohm, 2ohm and 2.2ohm and at 5v that's too high and will burn out the coils and the max I can be safe at is 4.3V which is nothing to 5v with the vapor production

And on the chart 5v, you need a 3ohm coil which is like stupid, is there any way of smoking at v without burning out coils, Dont say about dripper because I spent all my money on this haha.

Sorry can't help you I dont smoke

 

[elecricvapor]

Ah ok! (Good device)

a) Switch over to Wattage setting - this device will go up to 11watts (forget about voltage settings)

b) stick a 1.5ohm coil in your atomiser

c) set up around 8-9watts

Now, the only down side is that you have 100% VG - which is quite thick and not ideal for some stock coils - bvut no harm in trying. I would suggest a 60/40 or 70/30 ratio

If I need a 3ohm coil to smoke at 5v why do you recommend a 1.5ohm coil at 8-9 watts, will I get a lot of Vapor?

 

[elecricvapor]

Cant believe no one has spotted the obvious ?

100% VG in a clearo ?

Of course it will burn.....................................


The coils will need some serious wicking and air flow to keep up with 100% VG at high load.

Reduce your VG down or get a drippper, however on the MVP2 i think your limited to around 0.8ohm lowest.

han I

Can you suggest a cheap dripper that i can do a build on? and 0.8 is good enough is it not?

 

[elecricvapor]

Sorry can't help you I dont smoke

Douche, you know what I mean

 

[crunchynut]

View attachment 36362

Douche, you know what I mean

I know I do I just hate the word smoke or smoking

 

[TruckinVaper]

han I

Can you suggest a cheap dripper that i can do a build on? and 0.8 is good enough is it not?

If your sticking with the MVP2 I wouldn't bother with 0.8 ohm builds, it's on the limit of what it will fire and it will restrict the voltage it will fire at it. With the ten second firing limit it might just be up to temp when it cuts out. Build to around 1.5-2.2 ohms and it will give you the entire range the MVP2 is capable of.

I have to say though that I often run an MVP2 with a Nautilus at the full 11W, even with fairly thick juice. Have you tried the BVC coils?

 

[Carmadgaz]

Ah ok! (Good device)

a) Switch over to Wattage setting - this device will go up to 11watts (forget about voltage settings)

b) stick a 1.5ohm coil in your atomiser

c) set up around 8-9watts

Now, the only down side is that you have 100% VG - which is quite thick and not ideal for some stock coils - but no harm in trying. I would suggest a 60/40 or 70/30 ratio

My MVP2 on 9w with a T-dux 2 running a 1.5o coil and it certainly makes a nice little cloud

 

[Mawsley]

View attachment 36362

Douche, you know what I mean

Given the issues vapers currently have trying to convince the authorities that "vaping" isn't the same as "smoking", this probably won't be the first time someone has an issue with you confusing the terms

I don't smoke, I vape.

 

[fay69]

I resisted the urge to insert meme. Touches the nerve does 'smoke'

 

[angrymic1984]

But surely under adjective 1 that is exactly what u are doing (emitting a visible vapour) not wishing rattle anyones cage but it does say