What's new

Is an evod the best choice?

I'm still not really sure what ohm's to buy. Some people have said 1.8 some 2.2. I've got two batteries one 3.3v and one an ego+ that does 3.3 and 4.2 v. I may be best buying a selection of 1.8's and 2.2's.
I use a zmax mod that goes from 3.0 to 6.0 volts and no problems any of them will be fine just be careful and start at low voltage dont wanna dry hit or burn the tank that taste is hell to get rid of i'm using my 1.8 at 4.6 volts though so u should be ok
 
I use a zmax mod that goes from 3.0 to 6.0 volts and no problems any of them will be fine just be careful and start at low voltage dont wanna dry hit or burn the tank that taste is hell to get rid of i'm using my 1.8 at 4.6 volts though so u should be ok
OK thanks for that mate. Are both those evod's the same? http://www.krakenecigs.com/kanger-evod?search=evod http://myepack.co.uk/clearomizers/evod-clearomizer-ss.html I'm note sure what the "ss" means?edit: sorry
 
Last edited:
OK thanks for that mate. Are both those evod's the same? http://www.krakenecigs.com/kanger-evod?search=evod http://myepack.co.uk/clearomizers/evod-clearomizer-ss.html I'm note sure what the "ss" means?edit: sorry

Yes is the answer to that, Both look genuine by the pictures. Genuine kanger evods have two seals in the base, where knock off's don't. (I have both).
"SS" stands for "stainless steel", that's the outer jacket.
As for the coil heads, (that's all makes that I've ever had), there's always a slight difference in them. Even when they come from the same packet. You buy a pack of 5, that state they are 2.2ohm, and only 1 might actually be 2.2ohm. Some will be 2.0 some 2.4, and anything in between. Some will work better than others, and some will last longer.
It's down to manufacturing tolerances, very slight differences, as in, just a fraction more wire used or a slightly tighter or looser coil, makes a difference to each heads overall performance.
 
Yes is the answer to that, Both look genuine by the pictures. Genuine kanger evods have two seals in the base, where knock off's don't. (I have both).
"SS" stands for "stainless steel", that's the outer jacket.
As for the coil heads, (that's all makes that I've ever had), there's always a slight difference in them. Even when they come from the same packet. You buy a pack of 5, that state they are 2.2ohm, and only 1 might actually be 2.2ohm. Some will be 2.0 some 2.4, and anything in between. Some will work better than others, and some will last longer.
It's down to manufacturing tolerances, very slight differences, as in, just a fraction more wire used or a slightly tighter or looser coil, makes a difference to each heads overall performance.
Cheers mate. Have you ever ordered from myepack?
 
Yes I ordered a nitecore charger mvp2 and two evods yesterday and they were shipped the same day

Sent from my HTC One X using Planet of the Vapes mobile app
 
Yes I ordered a nitecore charger mvp2 and two evods yesterday and they were shipped the same day

Sent from my HTC One X using Planet of the Vapes mobile app
They seem pretty good from what I've read. Just put my order through. :)
 
Last edited:
Yeah mate u can pretty much trust the vendors on here cracking prices on mods too the mvp 2 was only 40 quid and that's with an iclear30

Sent from my HTC One X using Planet of the Vapes mobile app
 
Back
Top Bottom