ConfusedDaze
Member
- Joined
- Jan 1, 2014
- Messages
- 8
Hi Guys,
Bought a JacVapour Vgo2 VV kit - service from JacVapour has been really amazing - will say that before I say anything else - been a pleasure dealing with them from start to finish. Emails are responed to rapidly, kit turns up when its supposed to, just how it should be I guess !
At the moment I'm using a 2.4 ohm coil in the Nova tank and have the voltage around 3.8-4.3V area with the 80/20 PG/VG Banana Milkshake eliquid (18mg)
The main question I have is - should this be giving off a fair amount of vapour with this coil and voltage - as currently it isn't really.
There was a leak earlier that I fixed by taking the whole thing apart, washing it, drying it, replacing and centering the atomiser and then doing the whole thing
back up, leaving it to soak for 30mins and trying it - but the smoke I'm getting is still quite lacklustre.
I've heard that VG gives better vapour and worse taste - the taste isn't that prominent as it is with this PG based liquid. Wouldn't want it much worse than it is now.
I also tried a 1.8ohm coil at 3.6-3.8 ohm and that produced a reasonable amount of smoke but again nothing like I'm seeing in videos everywhere.
Am I missing something here ?
Also I have no idea what that connector at the bottom of the kit does, I'm guessing it provides a tighter connection to the tip of the battery but it doesn't seem to screw in or out a lot and I'm not really sure what I'm doing with it - that's the last connector that might be at fault if there is one at fault.
Anyway awesome forum had a lot of fun reading stuff here and thanks in advance !
Bought a JacVapour Vgo2 VV kit - service from JacVapour has been really amazing - will say that before I say anything else - been a pleasure dealing with them from start to finish. Emails are responed to rapidly, kit turns up when its supposed to, just how it should be I guess !
At the moment I'm using a 2.4 ohm coil in the Nova tank and have the voltage around 3.8-4.3V area with the 80/20 PG/VG Banana Milkshake eliquid (18mg)
The main question I have is - should this be giving off a fair amount of vapour with this coil and voltage - as currently it isn't really.
There was a leak earlier that I fixed by taking the whole thing apart, washing it, drying it, replacing and centering the atomiser and then doing the whole thing
back up, leaving it to soak for 30mins and trying it - but the smoke I'm getting is still quite lacklustre.
I've heard that VG gives better vapour and worse taste - the taste isn't that prominent as it is with this PG based liquid. Wouldn't want it much worse than it is now.
I also tried a 1.8ohm coil at 3.6-3.8 ohm and that produced a reasonable amount of smoke but again nothing like I'm seeing in videos everywhere.
Am I missing something here ?
Also I have no idea what that connector at the bottom of the kit does, I'm guessing it provides a tighter connection to the tip of the battery but it doesn't seem to screw in or out a lot and I'm not really sure what I'm doing with it - that's the last connector that might be at fault if there is one at fault.
Anyway awesome forum had a lot of fun reading stuff here and thanks in advance !