Kanger EVOD Woes.

[SimonB2008]

Could be that you are running the tank too low. Sometimes you get some small leakage into the battery chamber if you do this, so best to keep it topped up once you get done to 1/4 full. I would definitely check the rubber grommet is on tight too, that can cause a problem if you don't push it all the way down after cleaning. Hope this helps.

 

[SimonB2008]

i have the same issue with the 2 evods bcc i have it comes out the little hole out the back onto the battery just a drop of liquid i use the short chimney coil how do i fix this issue? every time i unscrew my evod to fill it i have a drop of liquid on my battery how did u manage to fix this i have this on 2 evods i thought it was my battery post first so i changed battery it did it on there too so now i know it is the clearomizer any ideas?

This is definitely because you are running the tank too low. Keep it topped up, never let it run more than 1/4 empty and you will avoid this problem. Easy to clean up, just use a wee bit of kitchen roll and it cleans the battery chamber out just fine.

 

[Danny K]

Is the evod just an MT3 in a shiny case ?
Keep them topped up to avoid a pressure drop and the leaking issues.

 

[Farmerben]

Could it be heat? Mine only leaked when I left it near the aga and got hot. Guess the heat either created pressure from air expansion or the juice got thinner.

hth