Kanger T3 issues..

[Jabz]

Hey guys, few issues with my kanger. I keep getting really light/airy pulls.. Like only a small puff of vapour comes out.. I bought the kanger as i didnt want to use ce4s but im forced to use one now as it is giving me good vapour but with less flavour.. Anyone know what might be wrong? I covered two of the three small holes on it but that just made the draw tighter but im still getting very little vapour. Thanks people.

 

[whit77]

What battery/mod you using it on mate

 

[Arctic_Wolf]

I'm currently trying out some Kanga MT3's and thus far they have been brilliant, I think I'm going to be using these a lot in the future. I have 3, but I'm just testing 2 of them at present, and they both produce masses of vapour. The flavour is very slightly muted in comparison to my CE5's, but I certainly can't say they produce a poor vapour, I'm getting wonderful clouds of it lol :-) .

Have you had a close up look at the wick, coil and head? Chances are that's your problem. You could get a replacement head for a couple of quid, change the head, and hopefully that will solve your problem.

 

[Jabz]

What battery/mod you using it on mate

its a standard 1100mah ego t..

I'm currently trying out some Kanga MT3's and thus far they have been brilliant, I think I'm going to be using these a lot in the future. I have 3, but I'm just testing 2 of them at present, and they both produce masses of vapour. The flavour is very slightly muted in comparison to my CE5's, but I certainly can't say they produce a poor vapour, I'm getting wonderful clouds of it lol :-) .

Have you had a close up look at the wick, coil and head? Chances are that's your problem. You could get a replacement head for a couple of quid, change the head, and hopefully that will solve your problem.

i got a couple heads with it.. Changed it to another one but no change, still a slightly leaky low vapour pull. Might go for the MT3 or evod if i cant get this to work!

 

[ssssstevo]

The gurgling is a constant ball ache as well

 

[DrVapenberg]

what's the resistance of the coil dude? try firing it without the tank on to see what's going on under the hood.make sure the head is firmly in place too.might not be getting a good connection?also make sure the batteries connector is clean........all things to try

 

[izzy11]

Hi I have four t3's, using them with a riva 1100, always had loads of vapour, minor problem with leaking from top when refilling on one of them, but sorted that easily with help from youtube videos. Maybe they are faulty or is your battery faulty?, I used replacement heads too, never a problem,
ps I use 70/30 pg/vg

 

[BfcDanny]

I currently have an MT3 on a VGO with an adapter, and no problems, so sould be a dodgy head i suppose.

I also find if i fill them within an inch of there lives then for no reason i can think of it gives me no gurgling

 

[whit77]

Jabz what ohm heads are you using on your ego battery bud

 

[Jabz]

@Jabz what ohm heads are you using on your ego battery bud

what's the resistance of the coil dude? try firing it without the tank on to see what's going on under the hood.make sure the head is firmly in place too.might not be getting a good connection?also make sure the batteries connector is clean........all things to try

I havent got a clue i know the battery is fine because it fires with ce4s fine.. I have a strange feeling the kanger isnt receiving the full 'power' when I fire it with the ce4 it makes that strong 'woosh' sound.. On the T3 it pops and gurgles with a low or silent 'Woosh' noise.. And when I put on the head without the tank it doesnt fire.. The button just flashes