Kanger T3 issues..
- Thread starter Jabz
- Start date
Jabz
Postman
- Joined
- Apr 14, 2013
- Messages
- 878
Could be too high ohm heads for your ego battery, being a bbc and all
Yeah im thinking that too.. Would an 1.8 ohm evod work?
Yeah I use 1.8s on a ego
You should be able to see what head you have at the moment, should have tiny numbers on the head ? The evods do, very tiny lol
Jabz
Postman
- Joined
- Apr 14, 2013
- Messages
- 878
They appear to be blank unless im not looking in the right place! Where about are the numbers normally printed?Yeah I use 1.8s on a ego
You should be able to see what head you have at the moment, should have tiny numbers on the head ? The evods do, very tiny lol
Not sure about the t3 bud, where did you get them from
Jabz
Postman
- Joined
- Apr 14, 2013
- Messages
- 878
Vapingthings.com.. I just tried another head with it, flipped the rubber cap inside upside down and took out the post and fluffed up the wicks.. Also blocked one of the three holes.. Filled it to 2ml and seems to be vaping great so far
i guess it may have been the other heads? Feels like its connecting/firing Properly now. Making that 'wooshing' noise Vapingthings.com.. I just tried another head with it, flipped the rubber cap inside upside down and took out the post and fluffed up the wicks.. Also blocked one of the three holes.. Filled it to 2ml and seems to be vaping great so far
Great stuff
glad its working for you now bud
Arctic_Wolf
Achiever
- Joined
- Apr 12, 2013
- Messages
- 1,813
I currently have an MT3 on a VGO with an adapter, and no problems, so sould be a dodgy head i suppose.
I also find if i fill them within an inch of there lives then for no reason i can think of it gives me no gurgling
Would you happen to have a link to one of these "VGO's" please m8? I'm very interested in upgrading to a large capacity battery instead of the Ego's. Could you provide a link to the adapter too please? Much appreciated if you could.
Glad you have sorted the problem Jabz :-) . Unfortunately with these things being mass produced in absolutely huge numbers, sometimes quality can suffer as a direct result. In the short few weeks and months I've been using these products, I've had a few problem parts. Thankfully the kit that is now becoming more widely available has gone through several revisions and upgrades as the manufacturers continue to identify and address the known problem areas, and the quality is getting much better :-) .
BfcDanny
Achiever
- Joined
- Jan 30, 2013
- Messages
- 1,359
Unfortunately i cannot tell you the adapter as i got both off @Marino-Teflon , i know jacvapour stocks the vgo's although you can get bigger battery ego's off many of the vendors in the discount section. Could always look into getting a big battery mod like the Vamo as well maybe
Double rubber cap method
I have found using two of the little rubber caps on the t3 works a treat for getting rid of gurgling. I leave the first rubber cap on the right way up then put a second cap on upside down on the center post of the atty head then screw the atty head on to the body of the T3 carefully. I have vaped 5 or six tanks worth with absolutely no gurgling at all using this method.
I hope I have explained myself well enough. Hope this helps you
I have found using two of the little rubber caps on the t3 works a treat for getting rid of gurgling. I leave the first rubber cap on the right way up then put a second cap on upside down on the center post of the atty head then screw the atty head on to the body of the T3 carefully. I have vaped 5 or six tanks worth with absolutely no gurgling at all using this method.
I hope I have explained myself well enough. Hope this helps you
Similar threads
