efun.top
Achiever
- Joined
- Apr 2, 2015
- Messages
- 2,618
Kangside KSD U1000 100w temperature control box mod with Yihi SX330 chip
Pre-sale: From 4th Aug tp 30th Aug
Let's have a look at it :
Use of U1000 100w temp control:
1. Five clicks fire button in 2 seconds to turn on the mod, OLED screen show
“HELLO”. Then displaying: battery condition, resistance X.XXΩ, wattage
XX.XW, temperature XXXF(C) and voltage X.XXV.
2. When keep pressing the fire button for over 10 seconds one time, the
output will shut off. The screen show“OVER TIME”.
3. Protection Function : Reverse connection protection, short circuit protection,
low voltage protection and high temperature protection.
4. Press the up and down button at the same time, it will check the atomizer
resistance.
5. Press the fire button and the down button at the same time, The wattage will
be locked. When locked, you can’t adjust the wattage. Press again to unlock
U1000 100w temp control menu:
Pre-sale: From 4th Aug tp 30th Aug
Let's have a look at it :
- Variable wattage: 5.0w-100.0w
- Chip: Yihi SX330 chip
- Atomizer resistance: 0.1Ω-3.0Ω
- Temperature control : 200F - 600F and 100C - 300C
- Size: 95*60*35mm
- Color: black, sliver
- Battery : changeable 18650(changeable)
- (Note: high drain battery more than 15C.)
- Thread : 510
Use of U1000 100w temp control:
1. Five clicks fire button in 2 seconds to turn on the mod, OLED screen show
“HELLO”. Then displaying: battery condition, resistance X.XXΩ, wattage
XX.XW, temperature XXXF(C) and voltage X.XXV.
2. When keep pressing the fire button for over 10 seconds one time, the
output will shut off. The screen show“OVER TIME”.
3. Protection Function : Reverse connection protection, short circuit protection,
low voltage protection and high temperature protection.
4. Press the up and down button at the same time, it will check the atomizer
resistance.
5. Press the fire button and the down button at the same time, The wattage will
be locked. When locked, you can’t adjust the wattage. Press again to unlock
U1000 100w temp control menu: