Review Kayfun monster

[South Coast Vaper]

Wow those are some huge drilled out air holes

Out of interest is the bore of the Center Post larger then the stock kayfun, as I found that's the bottle neck regards airflow, and making the air intake holes larger then the Center Posts bore makes little difference (not measured the original, but I drill it out to 5/64"/2mm) but guess these huge holes are more for cooling more then airflow????.

Not being very technical I can't comment on the bore size not measured but plenty of room. I can comment on the massive airflow. Yes it adds to the cooling as much as flow (lung hit champ). And to top it off great flavour. That was my one concern was that they might have sacrificed the flavour but in my opinion built right it's a great all round performer for the price.


Sent from my iPhone using Planet of the Vapes

 

[South Coast Vaper]

Damn you people. Another day, another tank purchased.
Anyone tried ni-200 in one of these bad boys yet?

Not got around to a temp build in it yet but being a fixed (but adjustable) centre pin it should bode well.


Sent from my iPhone using Planet of the Vapes

 

[mdhardy01]

Running mine with ni200 at 0.16 on my sxmini at 380f 30joules lovely smooth Vape nice thick clouds


Sent from my iPhone using Planet of the Vapes

 

[sganatra]

Running mine with ni200 at 0.16 on my sxmini at 380f 30joules lovely smooth Vape nice thick clouds


Sent from my iPhone using Planet of the Vapes

Mine should be here tomorrow. I can't wait!

 

[sganatra]

Hi guys,
So I just got this delivered earlier. Stuck a quick build with some wire supplied with the Lemo 2 that I had in my drawer at work. Came out at 0.44 ohms. Now thought I would go with the bell cap, so put the small chimney on and screwed everything back together. On filling however, all the juice pissed out between the chimney and bell cap.
Had to revert to the smaller tank for now. Any ideas why my bell cap isn't creating a proper seal with the chimney?

So far finding the tank just ok, but I'm going to need some time tinkering with the builds I think.

 

[askegi]

Hi guys,
So I just got this delivered earlier. Stuck a quick build with some wire supplied with the Lemo 2 that I had in my drawer at work. Came out at 0.44 ohms. Now thought I would go with the bell cap, so put the small chimney on and screwed everything back together. On filling however, all the juice pissed out between the chimney and bell cap.
Had to revert to the smaller tank for now. Any ideas why my bell cap isn't creating a proper seal with the chimney?

So far finding the tank just ok, but I'm going to need some time tinkering with the builds I think.

There is a small o ring that goes in the bell cap just below the driptip, is that missing?.

 

[sganatra]

Doesn't appear to be.

 

[sganatra]

There is a small o ring that goes in the bell cap just below the driptip, is that missing?.

Sorry. I meant the o ring doesn't appear to be there. There are a few in the spares bag. What colour should it be? Not sure how I'm going to get it in there yet tho.

 

[South Coast Vaper]

Doesn't appear to be.

Had no problems with mine fella. If the o ring is situated correctly at the top of the bell cap (it slots in the little crevice) should make a tight seal. Maybe a couple of pics may help us.


Sent from my iPhone using Planet of the Vapes

 

[sganatra]

Ok will try and take some later.
Rebuilt it again. Still not overly impressed.
Can't be right as airflow seems more restricted than my kf4