Mech Mods Tips?

[cliveh2]

vaperz cloud valhalla for that mushroom look [emoji23]

[emoji23] [emoji23] [emoji23]

 

[mattyk2010]

[emoji23] [emoji23] [emoji23] View attachment 189458

[emoji23] [emoji23] [emoji23] [emoji23]

 

[CYNIC 98]

I thought it was going to be easy to point to a few non-hybrid, lined mechs but it quickly became apparent they are like hens teeth these days. I looked through my collection and I only have 3 that meet all the criteria and none of them are readily available other than the Broadside and for an authentic you are talking north of $100

https://bjboxmods.com/product/broadside/

Clone available here, but I can't speak to their quality.

https://www.2fdeal.com/style-25mm-mechanical-mod-copper_p1110.html

There are a few options that present themselves, either a 2x700 and use an 18650 adapter to provide protection like the NATO but it's a bit of a tippy bugger because of the bottom cutout (clones available from the usual Chinese outlets),

https://www.thevapechase.co.uk/products/asylum-mods-nato-mech?variant=6502073794590

Contemplate a lined hybrid like the DEJAVU Mecha and be aware of the requirement for a protruding, fixed 510 (which you really should be doing anyway)

https://vaping101.co.uk/products/dejavu-djv-mech-mod

Or the Mage v2 stacked, you don't need to run it stacked and it has a liner, again the hybrid compromise.

https://vaping101.co.uk/products/coilart-mage-mech-v2-0-mod


Good luck with your search and keep us updated

I thought it would have been easy too but when looking for mechanical tubes it seems like just about all of them are hybrids. And yes I am aware of needing a protruding 510 pin for hybrids.

 

[CYNIC 98]

+1 for the broadside possible the best beginner mech I have seen/used

What were you planning to put on top of it?

I'm not too sure about what atty I'd be pairing it with. I like my single coil rdas but I've been wanting a goon for a while, so maybe the goon 1.5 or the goon 25 depending on the diameter of the tube.

 

[mattyk2010]

I thought it would have been easy too but when looking for mechanical tubes it seems like just about all of them are hybrids. And yes I am aware of needing a protruding 510 pin for hybrids.

Then buy a hybrid tube mate to be honest i dont understand the reasoning on advising people not to at first, i think its old advice from when most attys had 510 pins that made your ass twitch when you hit the fire button but most drippers now have a protruding pin so don't worrie about that

 

[cliveh2]

I'm not too sure about what atty I'd be pairing it with. I like my single coil rdas but I've been wanting a goon for a while, so maybe the goon 1.5 or the goon 25 depending on the diameter of the tube.

I use my broadside with a wasp nano, save the duel coil rdas for mostly 21700/20700 mods, although with the correct batteries, think a Kennedy would be pukka on a broadside (someone will tell me on the diameter?)

 

[cliveh2]

Then buy a hybrid tube mate to be honest i dont understand the reasoning on advising people not to at first, i think its old advice from when most attys had 510 pins that made your ass twitch when you hit the fire button but most drippers now have a protruding pin so don't worrie about that

My 1st ever mech was a mad hatter tube which is a hybrid, or competition mod as it was know, as long as the atty 510 is solid and protrudes and insulated you should he good, just double check[emoji6]

 

[mattyk2010]

My 1st ever mech was a mad hatter tube which is a hybrid, or competition mod as it was know, as long as the atty 510 is solid and protrudes and insulated you should he good, just double check[emoji6]

Been using a mad hatter kit today i got from @joe clay and i forgot how good a 22mm atty can be with dual coils [emoji4]

 

[cliveh2]

Been using a mad hatter kit today i got from @joe clay and i forgot how good a 22mm atty can be with dual coils [emoji4]

Weird, sold mine to Joe clay about 1 year ago [emoji848]
Was supposed to reply to the OPs post about hybrid mods as I am sure you know more about them than I do[emoji6][emoji23]

 

[mattyk2010]

Weird, sold mine to Joe clay about 1 year ago [emoji848]
Was supposed to reply to the OPs post about hybrid mods as I am sure you know more about them than I do[emoji6][emoji23]

Was it gunmetal? And i don't know much so i doubt it [emoji23]