What's new

Mech squonk clones

AdriaNocenzi

Postman
Joined
Sep 20, 2016
Messages
532
Are mech clone safe to use? Is there any kind of risk? If I decide to get one will be my first mech, so I'm concerned about.
 
The nice things about mechs is they are simple devices. The best thing to do for piece of mind is take it apart and understand how it works and that everything is assembled correctly. Make sure there are no possibilities of shorts, or weak points that will break and no loose parts or swarf left inside than can cause a problem. Make sure your battery wraps are in tact and preferably have one with a locking mechanisms so it can't fire in your pocket and it should be fine bud.
 
what are you looking at, some of those plastic clone squonkers are really poor quality ..... why not just buy a pulse if you want a mech squonk that's cheap (and decent quality)
 
+1 for the Pulse, works well with a single coil atomiser.
 
I was looking at this https://m.fasttech.com/p/9616163

But there are not review from buyers that's why I asked
I would avoid that one like the plague, enclosure is ok but internals are very shoddy.

The best cheap mech squonkers you can buy right now are

Hugo Squeezer
Geekvape Athena
Pulse BF

If you really insist on going down the clone route then the clone Galactika Xena is a very nicely made and hard hitting mech squonker and can be had for around a tenner :)
 
w
I would avoid that one like the plague, enclosure is ok but internals are very shoddy.

The best cheap mech squonkers you can buy right now are

Hugo Squeezer
Geekvape Athena
Pulse BF

If you really insist on going down the clone route then the clone Galactika Xena is a very nicely made and hard hitting mech squonker and can be had for around a tenner :)
dont forget the wotofo nudge mod but only comes in black
rBVaGFn8TkmAPxpgAACuPPorlXA169.jpg
rBVaI1n8TbqAP3bOAACZbD1wrrs601.jpg
WOTOFO-NUDGE-Mechanical-Squonk-Box-MOD_003994958fa4.jpg
 
Back
Top Bottom