My Quad "Duel Micro" Coil

[Firadar]

Didn't want to take over the previous thread I was posting this in so made a fresh one.

This is what I like to call a Quad Duel Micro Coil set up.

Each coil is an 8 wrap micro coil made from .45mm kanthal A1, I call them duel micro because I space each coil out between the 4th and 5th wrap, I found this allows more vapour to escape from between the gap and it also allows juice to be more quickly absorbed at the coil itself.

The end result is 0.2 ohms and I use the Double Cross RDA v1.5, 30 amp Sony batteries in an NZonic v5.

Soz for dodgy photos only have my camera phone.





The clouds this makes of lovely flavour.



But that was my days coiling fun

 

[RicModMaker]

Only 4? Up your game fella ;-)

 

[Firadar]

Only 4? Up your game fella ;-)

Thats why i was asking about a 22mm dripper in a previous thread.. need more space but saying that i did just about manage 8 smaller coils in the Atomic

 

[Chegs]

I've only got a 17 mm diameter atty,so I only have room for 2 coils.Its also a genesis style with a tank so I've had to make the mesh wicks with a hole down the middle just wide enough to insert a needle for filling as 1 of the wicks is in the filling hole. lol
It is so flavour full that I'm suffering from itchy skin as I'm allergic to citrus/dairy produce etc,but I'm thinking it might benefit from a second airhole alongside the cap.

 

[RicModMaker]

Thats why i was asking about a 22mm dripper in a previous thread.. need more space but saying that i did just about manage 8 smaller coils in the Atomic

Good work ;-)

 

[pauly meatballs]

Tried my hand at a quad coil. Pretty successful for a first attempt! 9 wraps of .3 kanthal round a 2mm drill bit. Came to 0.2 ohms. Bit low for my 20amp batteries so I used one that had run down to 3.8v. Vaping at 72 watts!

I couldn't have done it without my new cheapo ebay tweezers! So much easier than with the big pliers I've been using up till now!

 

[cliffo]

Good job !