Geordie Rob
Achiever
- Joined
- May 2, 2014
- Messages
- 1,913
Very quick and dirty first look, quick pics and quick ramblings.
Nemesis Hybrid adapter 8bitvape arrived this morning first impressions does what its supposed too easy to put on/off atis works with both flat/nipple tops although if you like really short switch throw prefers nipple:
Double holes on replacement top cap should make this very easy to remove if it gets stuck mine hasnt so far, threads are perfect and everything is nicely sealed up so no juice issues, my only beef is with that tiny bugger screw far right.
Can not comment on materials used as site I bought it from is temporarily closed and I cant bloody remember.
For flat tops (I may shorten this screw to reduce throw it doesnt need to be as long as it is imho)
Can run like this for nipple tops, screw you can see dead centre is from the ati
500 mode nipple top (AW18490) really short throw no tiny ass screw mode.
300 flat throw a couple of mm larger than not running in hypbrid might not bother some, tiny screw to blame needs to be shortend
18650 nipple with kayfun mod behind running in 500
Working with any ati I throw on, 300 flat top again, got no 300 nipple tops, that screw is getting it soon
At no point have i messed with the centre posts on these ati's some you cant, however you could potentially shorten that screw length into the tube by a bit of adjustment on your ati.
Available at 8bitvape for three quid or if your mega tight you can save a pound and buy one from FT.
8bit did well on this better than my 100ml juice that turned out to be 0mg nic sigh.
Nemesis Hybrid adapter 8bitvape arrived this morning first impressions does what its supposed too easy to put on/off atis works with both flat/nipple tops although if you like really short switch throw prefers nipple:
Double holes on replacement top cap should make this very easy to remove if it gets stuck mine hasnt so far, threads are perfect and everything is nicely sealed up so no juice issues, my only beef is with that tiny bugger screw far right.
Can not comment on materials used as site I bought it from is temporarily closed and I cant bloody remember.
For flat tops (I may shorten this screw to reduce throw it doesnt need to be as long as it is imho)
Can run like this for nipple tops, screw you can see dead centre is from the ati
500 mode nipple top (AW18490) really short throw no tiny ass screw mode.
300 flat throw a couple of mm larger than not running in hypbrid might not bother some, tiny screw to blame needs to be shortend
18650 nipple with kayfun mod behind running in 500
Working with any ati I throw on, 300 flat top again, got no 300 nipple tops, that screw is getting it soon
At no point have i messed with the centre posts on these ati's some you cant, however you could potentially shorten that screw length into the tube by a bit of adjustment on your ati.
Available at 8bitvape for three quid or if your mega tight you can save a pound and buy one from FT.
8bit did well on this better than my 100ml juice that turned out to be 0mg nic sigh.
Last edited:
