New to advanced vaping

[James.]

I've had a basic shisha pen for a while (eGo & ce4) (I think). I want to get something better but don't have a clue where to start. There's so much out there and don't understand what the difference to it all is, ohms volts etc.
I obviously don't want anything too complicated and don't want to have to build and test anything like a mechanical mod but I do want something decent.
Can someone give me an overview of what is what and point me in the direction of some good kit.
I'd like a decent battery unit (internal battery or rechargeable) and a good tank/atomiser. As I said I don't want to get into the building side of things (yet) but ones that have replaceable parts is fine.
Not looking to spend lots of money ie £100+ for a battery or tank but don't mind spending sort of £40/£50.

Thanks for any help guys

 

[Tubbyengineer]

I've had a basic shisha pen for a while (eGo & ce4) (I think). I want to get something better but don't have a clue where to start. There's so much out there and don't understand what the difference to it all is, ohms volts etc.
I obviously don't want anything too complicated and don't want to have to build and test anything like a mechanical mod but I do want something decent.
Can someone give me an overview of what is what and point me in the direction of some good kit.
I'd like a decent battery unit (internal battery or rechargeable) and a good tank/atomiser. As I said I don't want to get into the building side of things (yet) but ones that have replaceable parts is fine.
Not looking to spend lots of money ie £100+ for a battery or tank but don't mind spending sort of £40/£50.

Thanks for any help guys

For about £50 you can get an Innokin SVD or an MVP2, Both variable voltage / wattage, both with atomisers of reasonable quality or you can Pick and Mix with something Like a Zmax or Vamo and get a Protank 2 or 3 or and Aspire BDC, have a look around the Vendors, you'll find some good stuff. Kraken E-cigs may well be doing a Vamo deal soon and MyEpack have some good deals too...

 

[BuffaloVapes]

Personally I rate the Vision VV Spinner with an EVOD/Protank setup when moving upwards. A 1300 Mah battery will be hard to drain in a day and will remain socially stealthy. The battery is versatile, very robust and simple to use, whilst giving you the scope to try new things. The EVOD/Protank setup gives great results, comes fully maintainable with good value replacement heads and is also fully (very easily) rebuildable, so will see you through to your next stage of rebuilding. A budget RDA, 1/2mm wick and some .20 kanthal wire will be about £15 and will give you lots to play with. There's nothing like dripping!!

If you got any more questions, get in touch and good luck.

Buffalo-Vapes

 

[BuffaloVapes]

BTW way the itaste is also quite good in stepping up and offers the ability to set wattage and determine the resistances of your DIY coils (not necassary IMO but maybe you'll appreciate that?).

 

[Vapingmonkey]

As I understand it (although I think people make it more complicated than it needs to be)

Ohms - is the resistance your coil gives
the lower the resistance the quicker it heats up, the faster the vapor production - good for short sharp pulls
the higher the ohms, the slower it heats up - Good for longer lung inhales

The more watts and Volts the faster and higher the temperature. (at least that's how I figure . . . I await the Ohms police to put me straight)

You could sit and work out V=I*R and so on but why bother with all that when you can use something like a Vamo, chuck in your tank and adjust the Watts or voltage to your taste?

What is your Vaping style? do you want to constantly drip liquid on every 5 mins for awesome flavour, or do you want to fill up a tank and vape til its gone or your battery dies?

Do you want to just buy replacement atomizer heads, or do you want to build your own?

Do you want it to be a skinny device or do you want a beast of a mod?

There's lots to be had at around £40-60 but it soon becomes an obsession


This is my brain on a regular basis

"Do I get another tank, another battery, oooh thats a nice drip tip, they do wraps for the Vamo?!! What's a passthrough? do I need one? Bacon Flavour ejuice?! Kanthal, SS Mesh, Micro coils . . nano coils . . . dragon coils???! Genny Atty . . . owww bunt my hand oxidizing my coil . . . "

 

[Mawsley]

Welcome James.

There's so much information on the site and you'll find everyone has their own preferences. I go for rebuildable attys and mech mods so I'll bow out now as that's not what you're after.

Yet.

Come join us.

 

[James.]

I think I'm going to go for the vamo 5 and a pro tank. I want something that is easy to maintain and doesn't take a lot of work to sort out. Maybe one day I'll go down the route of building my own but for now just want the next step from a basic battery and atomiser

 

[stephenfletcher]

an excellent choice, ive had my vamo v5 with a protank 3 for just over a week, its brilliant. i upgraded from a vision spinner, which was also a good improvment from a ego 1100mah. My advice would be to buy a charger and batteries seperatley so you get better quality and safer ones.

 

[stephenfletcher]

Ebay seller : Member ID magikman369 sells a quality kit within your budget

 

[Vapingmonkey]

I think I'm going to go for the vamo 5 and a pro tank. I want something that is easy to maintain and doesn't take a lot of work to sort out. Maybe one day I'll go down the route of building my own but for now just want the next step from a basic battery and atomiser

That's my setup. Love it. Especially as you can rebuild your attys.