Nife30

[scrumpox]

Yeah, stealthvape NiFe30 is 0.005 scrumps. Makes a huge difference to the vape from 0.0032 if inputting TCRs.

I very very rarely go above 450F and typically use 50 watts on the vtc mini. That's usually an instant and strong blast of warm as I can tolerate vapour. I tend to think there's something wrong with builds that need to go over 500F to produce a decent vapour temp. I'm sure some people like their vape hotter than me but I like it pretty warm. That's on Aromamizer RDTA and Velocity RDA.

It's all becoming clearer ... hence I'm setting the Stealthvape NiFe30 as Ni200 on my mods (I'm not inputting TCRs into either.) Thanks guys.

 

[Tubbyengineer]

It's all becoming clearer ... hence I'm setting the Stealthvape NiFe30 as Ni200 on my mods (I'm not inputting TCRs into either.) Thanks guys.

You'll also find an equivalent setting chart on Steam Engine in the Wire Wizard section (Select the wire type in the bottom left dropdown boxes - then look at the top right for the charts and graphs). You'll find that Ni200 and Stealthvapes NiFe30 crossover at about 390f so if you vape around that setting normally theres very little adjusting to do...

 

[fatstu]

It's got to be the wicking - if the wicking isn't fast enough, the coil heats up too quickly, the mod cuts power and the vape is crap. A tempting workaround is to increase the temp setting, which brings back the vapour, but also burns the juice.

New coil, alot less wick and 30w 400-450f and its fine, liquid is still burning though. might be the fact i'm using sweet cakey flavours which are rather dark in colour.

 

[steves]

Yep using Stealthvapes Nife30, Coils are spaced one slightly more so than the other, both are starting to get black likely juice burning I would expect.

Havent used the NiFe30s but NiFe48 (aka NiFe52 lol) does go black after light pulsing or torching! Perfectly normal apparently!

 

[Polo65]

Yea @steves looking forward to trying out some NiFe52. I am using Nife30 just now and enjoying that, I have heard that NiFe52 is good I have just ordered some. Now the wait [emoji12]

 

[danb]

I have heard that NiFe52 is good I have just ordered some.

Where from?