Pulse bf mod cooler vape

[nwhornet]

forgive me if I'm wrong but this thread is giving me a serious sense of deja vu.... have we not been over all this already?

Your right Sherlock. OP has gone from a Pulse80 (regulated) to a Pulse mech. Strange things are afoot Holmes

 

[eyeball kid]

Your right Sherlock. OP has gone from a Pulse80 (regulated) to a Pulse mech. Strange things are afoot Holmes

No I think we where going to dump the pulse. Was there ever a pulse 80. Maybe I missed that.
Either way the ohms need testing before use for safety.
I understand the op has been vaping for five years so you may have one of the old 510 adapters that came with old pens. If you do, that may allow you to test the ohms of the rda on the pico by raising the conection above the battery cap.

 

[nwhornet]

No I think we where going to dump the pulse. Was there ever a pulse 80. Maybe I missed that.
Either way the ohms need testing before use for safety.
I understand the op has been vaping for five years so you may have one of the old 510 adapters that came with old pens. If you do, that may allow you to test the ohms of the rda on the pico by raising the conection above the battery cap.

Check his previous posts. He was going to dump the Pulse 80

 

[nwhornet]

Check his previous posts. He was going to dump the Pulse 80

Oops teach me to read posts properly. Apologies.

 

[eyeball kid]

Oops teach me to read posts properly. Apologies.

Easy to loose track bud.
Hope op sorts it out.

 

[John68]

If it's too hot for you then you'll just have to make/buy a higher resistance coil .... that's the only way to 'turn it down' on a mechanical device, depending on the resistance you have right now you could well be vaping at 90+ watts.

Hello
Tester arrived
My results are resistance 0.11 ohms
When fired 3.16 ohms
Hope I have checked correctly

 

[Simon G]

Hello
Tester arrived
My results are resistance 0.11 ohms

no wonder it's hot..... that's 160w on a fresh battery.

38A draw too ....

 

[nick meehan]

Bloody hell! i would have a word with the shop where you got it from.

 

[Simon G]

When fired 3.16 ohms

also ...... it can't be 3.16 ohms??

 

[Huggett]

So to recap.

A. Shop sold an unregulated device to someone (no offence OP) who didn't know mech safety?

Devils advocate... Ok, fair enough maybe he THOUGHT the customer did. Even so, still check.

B. He built or atleast fitted the coils?

Ok. If you're fitting coils or building for a customer, sense says they do not know what a mech is.

C. 0.11 ohms on a fecking mech? No. Right outside the safety limits of the batteries.