Reuleaux RX200S TC Help Please

[humax]

Hi Guys

Can anyone please tell me how to get TC to work on a Reuleaux RX200S I have some SS wire it their and set it to 420 but nothing is happening when I press the button apart from the display jumping all over the place. Its fine in VW but not TC. What am I doing wrong.

Thanks

 

[Donald Trump's fister]

First of all when you say the display is "jumping all over the place" what exactly do you mean, is it the ohms that are jumping around or somthing else or all of the display ?, also what tank / rda etc are you using on it and what type of ss wire are you using (i presume it's 316L) ?

ATB

 

[humax]

Its the F display that keeps changing. The tank is a UD Bellus with some 317L coils in it

 

[Donald Trump's fister]

do you mean when you press the fire button it goes up as you vape on it ? as of course that's what happens until it reaches temp protect or lower temp depending on the wattage you have selected for your needs ?

 

[humax]

Yes that's what seems to be happening but its not heating the coils up as their is no vape coming out of it and i set it to 420.

 

[Donald Trump's fister]

Ok , what wattage have you got selected for your vape, you say you are using the bellus and i take it you have 2 coils installed, what ohms are they in total then first ?

 

[humax]

Yes 2 coils installed and the ohms come out at 0.42 and the wattage is set to 420F it will let me take it to 600F but its still not firing

 

[Donald Trump's fister]

Yes 2 coils installed and the ohms come out at 0.42 and the wattage is set to 420F it will let me take it to 600F but its still not firing

No, i dont mean what temp you have it set to (420f) but what wattage heve you got it set to , to get to that temperature of 420f ? (i would suggest starting off at about 40 - 50 watts ) if you scroll through the menu in ss temp controll untill you get to watts , then set the wattage there required to get to your required temp of vape ( if i remember correctly its three presses of the fire button in temp crontroll mode then using left / minus button scroll down to wattage and then set it and then press fire button again to enter / confirm wattage selected ) sorry but i'm not near my rx200s at the moment but you have to first set the wattage you want to get to the temp you want if that makes sense. have a look at the watts on your rx now and tell me what is it saying at the moment ?

 

[humax]

I cant see anywhere to set the wattage and i am pressing the buttons. At the bottom under the F display it says 1.8 W, and i don't seem to be able to change that setting

 

[Donald Trump's fister]

I cant see anywhere to set the wattage and i am pressing the buttons. At the bottom under the F display it says 1.8 W, and i don't seem to be able to change that setting

Right well thats your problem to start with , if it's at 1.8w you aren't gonna get any tupe of vape off it in temp control. first click the fire button three times in ss mode and the display should flash then left click the minus button to scroll down to wattage and raise the wattage upto say 40watts using the right plus button ( sorry but as i say i'm not near my rx at the moment and doing this from memory) and then press the fire button once to enter the desired wattage selected. I have to go to bed now but i suggest getting out the user manual and it will explain or go on you tube or google the rx200s settings and all will be explained. If you're still stuck then i will reply tomorrow to help, ok. Atb and hope you get it sorted.