Ss316L vs N80? Flavor, toxic releases etc

[Bluejackme]

Good evening Apes! I currently use my Braided N80 coils from Geekvape and have been using it since beginning of june month, dryburn + rewick a couple of times, i know its not that safe to do that because of the metal toxic release from dryburning or am i wrong?

I was thinking of buying some SS316l wire 26 gauge, because ive read that 316 is more safe to use with little toxic in? How is the taste compared to N80? I really like the taste that N80 has to offer me! I tried to use a pair of twisted kanthal 24g yesterday and blaah it doesnt taste as good as N80 does and has a more of a muted taste like 4 out of 10, and N80 has a 8 out of 10 in taste sharpness. So is ss316La good to go for taste and for a safer vaping?

 

[zouzounaki]

I would say the taste is exactly the same, unless for some reason you can detect a state from certain types of metal. I can’t notice any difference.

And as far as I know ni80 is safe to use. I don’t dry burn it, mind. But I don’t dry burn the steel either.

I have it on good authority, at least, that either are 95% less toxic than fags.

 

[Bluejackme]

I would say the taste is exactly the same, unless for some reason you can detect a state from certain types of metal. I can’t notice any difference.

And as far as I know ni80 is safe to use. I don’t dry burn it, mind. But I don’t dry burn the steel either.

I have it on good authority, at least, that either are 95% less toxic than fags.

[emoji51] [emoji106] [emoji106] [emoji106]

 

[anthonyb]

The dose makes the poison.
The level of "metal toxins" released are "not expected to be of significant health concern for smokers."

A little light reading,
http://www.ecigarette-research.org/research/index.php/research/research-2015/212-db

Followed by this one.
http://www.mdpi.com/1660-4601/12/5/5215

 

[Bluejackme]

The dose makes the poison.
The level of "metal toxins" released are "not expected to be of significant health concern for smokers."

A little light reading,
http://www.ecigarette-research.org/research/index.php/research/research-2015/212-db

Followed by this one.
http://www.mdpi.com/1660-4601/12/5/5215

Thanks will read it [emoji4]

 

[greenbrucelee]

if you dry burn ss316L or any of the other stainless types you do it at no more than 20w initially as it can break down and you do not burn it to get it glowing orange although if you get spaced coils they dont need it watch this

 

[zouzounaki]

It can glow orange at well less than 10w, never mind 20.

 

[greenbrucelee]

I know 10-20 is apparently dry burn range but starting of higher than that is where the bad stuff can be released.

 

[Bluejackme]

But is it possible to dry burn it at 10-20w if resistance is about .15 - .20? wouldnt it take forever then? I dry burn my N80 .16 at about 35w up to 50 sometimes, but i will head over as soon as possible to my vapeshop and buy some 316 wire, is twisting 316 coil any good or shall i go for a straight wire coil with 316? 5-6 wraps

And how will i know with the 316 if they glow proper from the middle to outside if they not supposed to be orange? Just in case if i need to adjust them after making the coils

 

[Bluejackme]

if you dry burn ss316L or any of the other stainless types you do it at no more than 20w initially as it can break down and you do not burn it to get it glowing orange although if you get spaced coils they dont need it watch this

Will keep it in mind!