Bluejackme
Postman
- Joined
- May 7, 2018
- Messages
- 141
Is 26 or 28gauge to go for if i want between .15 or .25 in resistance?
I know 10-20 is apparently dry burn range but starting of higher than that is where the bad stuff can be released.
But is it possible to dry burn it at 10-20w if resistance is about .15 - .20? wouldnt it take forever then? I dry burn my N80 .16 at about 35w up to 50 sometimes, but i will head over as soon as possible to my vapeshop and buy some 316 wire, is twisting 316 coil any good or shall i go for a straight wire coil with 316? 5-6 wraps
And how will i know with the 316 if they glow proper from the middle to outside if they not supposed to be orange? Just in case if i need to adjust them after making the coils
Yeah im gonna do spaced coils, i usually do spaced for more flavor and because i suck to do contact coils without a jig winderWhy not just make spaced coils, if you’re worried about this? Then you’ll not need to dry burn them. They are better as well.
Good thing then [emoji106]In that case you don’t need to dry burn them at all.