What's new

Steam Crave Meson RTA

silken

Postman
Joined
Sep 20, 2015
Messages
84
Hi all,

Has anyone experienced any difficulties in unscrewing and removing the build deck from the Steam Crave Meson RTA? I've just received mine and cannot unscrew it!
 
Did you look through the manual that came with it? Methinks there's something special in there.
 
Hi all,

Has anyone experienced any difficulties in unscrewing and removing the build deck from the Steam Crave Meson RTA? I've just received mine and cannot unscrew it!

I don't have the Meson but a new (old Stock) Aromamiser 2 I bought a year ago had the same problem. I opened the juice ports, taped up the airflow rings and glass (making sure the tape didn't cover the joint of the bottom cap) poured a few mils of juice into it, left the top cap open - put it in a shot glass so it remained upright and stuck it on top of my central heating boiler for a few days.

It got a bit messy - and I had to grip it with a pair of damp cloths to unscrew it, but it did the trick.

Edit - As the Meson is top airflow you don't need to ponce about with tape (I forgot lol)
 
I vaguely remember (after reading a review) one had to use a coin to remove the chimney once the top cap was removed.
 
I don't have one but if it's the same as the Aromanizers then you don't need to unscrew it. Just wiggle it and pull. They can be quite tight at first but do loosen up after a few builds.

Edit: Unless you mean unscrewing the bottom to get to the deck. Sorry, just re-read your post.
 
Popping it in the freezer worked! However, the amount of burnt hits I’ve had is mad! Still, I’m sure it’s user error on my part. I’m usually an RDA fan and thought I’d try a tank.
 
Popping it in the freezer worked! However, the amount of burnt hits I’ve had is mad! Still, I’m sure it’s user error on my part. I’m usually an RDA fan and thought I’d try a tank.

I grabbed this when it was released. Had the same. Dry hit central. Try to rewick with A LOT less cotton. I was at the point where I thought the deck was 100 going to flood because there was so little cotton and that’s when it stopped the dry hits and started to vape beautifully.
 
I grabbed this when it was released. Had the same. Dry hit central. Try to rewick with A LOT less cotton. I was at the point where I thought the deck was 100 going to flood because there was so little cotton and that’s when it stopped the dry hits and started to vape beautifully.

Thank you! I’ll give that a try, it has been relegated to the drawer for a few weeks!
 
Back
Top Bottom