Stingray Clone switch stuck

[Deleted member 13094]

Got a stingray clone from mvapes a couple of days ago, only got round to trying it out this morning.

The switch seemed to catch every few tries but then was fine for a few hours, now the switch is stuck pressed in and i cant get it unstuck.

It looks as if the little pin is sticking on something but i cant figure a way to get it out.

Any suggestions?

Cheers
Sm00shed

 

[vaporsizer]

This might sound weird but you could drop it onto a carpet. The impact might jog it & it won't scratch. It'd work better on a hard floor but then damage might occur.

 

[the jester]

Have you tried stripping it down yet.or you saying it won't unscrew?...nail or screwdriver in the contact plate in the delrin first.remove that.this will expose the bottom magnet screw which once removed will leave you with the base ring and small pin and can fettle it a bit to sort it

Tiniest touch of vase line (god knows why we all have vase line lying round) inside the inner ring and pin and will be a lot smoother

Sent from my GT-I9505 using Planet of the Vapes mobile app

 

[Deleted member 13094]

Have you tried stripping it down yet.or you saying it won't unscrew?...nail or screwdriver in the contact plate in the delrin first.remove that.this will expose the bottom magnet screw which once removed will leave you with the base ring and small pin and can fettle it a bit to sort it

Tiniest touch of vase line (god knows why we all have vase line lying round) inside the inner ring and pin and will be a lot smoother

Sent from my GT-I9505 using Planet of the Vapes mobile app

Got it all stripped down apart from the base ring and small pin which is stuck in. from what i can see it looks as if the small pin is sitting at a slight angle and has jammed.

 

[the jester]

Bugger...don't know what to suggest....you got a big hammer?

V small screwdriver in the pin whole and wiggle it a bit?..not heard of one doing this

Sent from my GT-I9505 using Planet of the Vapes mobile app

 

[Deleted member 13094]

Gave that try but the pin isnt moving at all, tried poking a paper clip through the vent hole to push the pin straight but its not moving at all

Cheers for the ideas though