myvapingreviews
Postman
- Joined
- Mar 18, 2014
- Messages
- 108
Introduction:
This Launcher Mod produced by Rainbowheaven,, was kindly supplied by Neil at Mechmode.com for the purpose of this review, and can be purchased from the Mechmode website for £24.99 including FREE Delivery, This is the first Mechanical Mod that I have reviewed, so will be reviewing it from a new comers point of view, new to the world of Mechanical Mods and that next level of my vaping journey.
It is described on the MechMode.com website as follows:
“The Launcher mechanical mod clone is a well built and sturdy piece of kit, full stainless steel with copper contacts and adjustable 510 contact pin.The mod is telescopic and will take 18350,18500 and 18650 batteries, it has a very nice logo laser etched on the battery tube and feels great in the hand being quite heavy and well built. This mod is well known to hit hard maybe due to the conductivity of the copper contacts.”
Note: Mechanical mods are unregulated mods that operate by point of contact, therefore the device is powered by the battery touching the contacts inside the unit.They do not have any wiring. Because mechanical mods are unregulated you must use protected li-ion batteries or safe chemistry IMR batteries as an unprotected battery can cause short circuit and overheating
Features and Specs:
Name : The Launcher Mod Clone
Manufacturer: Rainbow Heaven
Main Material : Stainless steel
Atomiser Connection: 510
Key Feature: Telescopic tube
Battery Size: 18350-18500- 18650
Battery Contacts : Copper
Firing Mechanism: Spring loaded flush mounted
Locking Mechanism: None - recessed Flush Mounted Switch
Built in Safety : Four Vent Holes
Mod Width (Max) :25mm wide
Mod Height (Max) :83mm high
This telescoping stainless Mechanical Mod comes fully assembled, but can be easily broken down into its component parts.
Continue Reading >>
This Launcher Mod produced by Rainbowheaven,, was kindly supplied by Neil at Mechmode.com for the purpose of this review, and can be purchased from the Mechmode website for £24.99 including FREE Delivery, This is the first Mechanical Mod that I have reviewed, so will be reviewing it from a new comers point of view, new to the world of Mechanical Mods and that next level of my vaping journey.
It is described on the MechMode.com website as follows:
“The Launcher mechanical mod clone is a well built and sturdy piece of kit, full stainless steel with copper contacts and adjustable 510 contact pin.The mod is telescopic and will take 18350,18500 and 18650 batteries, it has a very nice logo laser etched on the battery tube and feels great in the hand being quite heavy and well built. This mod is well known to hit hard maybe due to the conductivity of the copper contacts.”
Note: Mechanical mods are unregulated mods that operate by point of contact, therefore the device is powered by the battery touching the contacts inside the unit.They do not have any wiring. Because mechanical mods are unregulated you must use protected li-ion batteries or safe chemistry IMR batteries as an unprotected battery can cause short circuit and overheating
Features and Specs:
Name : The Launcher Mod Clone
Manufacturer: Rainbow Heaven
Main Material : Stainless steel
Atomiser Connection: 510
Key Feature: Telescopic tube
Battery Size: 18350-18500- 18650
Battery Contacts : Copper
Firing Mechanism: Spring loaded flush mounted
Locking Mechanism: None - recessed Flush Mounted Switch
Built in Safety : Four Vent Holes
Mod Width (Max) :25mm wide
Mod Height (Max) :83mm high
This telescoping stainless Mechanical Mod comes fully assembled, but can be easily broken down into its component parts.
Continue Reading >>
