Bearing in mind that I got my igo-f from a different vendor, my findings so far:
Wet at least the end of the wicks before you put them down the well.
I filled the well without any wick in it with a syringe and with the top of, it will hold about 0.5ml of liquid.
I found this with the agi as well in dripping mode, and this is the updated agi, but some leakage still occurred from the bottom of the wee alan key type screws, Todd's tip of using vaseline on this worked 100% on the agi, will try that on the igo-f too, and no dogs, or dwarves for that matter, were involved. Maybe.
If you have the wicks shoved down the holes into the well (2mm silica, I used), filling from the b ottom caused no juice spilling out from the wick holes.
You can use this with the wick in or out of the holes, do not overfill our the airhole will produce a mess, but, over time, the well will collect some liquid anyway, which helps with a bit of a wobble to keep the taste going now and again.
Great taste.
Air hole seems neither too loose nor too tight, though I guess you could drill for more looseness if required.
Also, using the end of a small screwdriver or a needle, etc, can help guide the wick into the holes in help is needed.
http://www.planetofthevapes.co.uk/f...-the-future!-(for-me-anyway)?highlight=cotton
