Michael jackson
Achiever
- Joined
- Jan 6, 2017
- Messages
- 3,801
So as others before me I was lucky enough to win this new mod from Voopoo on a condition we would drop a review. The opinions in this review are my own and are true to how i feel.
Right so first up thank you @VOOPOO for giving me the chance to review this kit. Since owning the Original Black Resin Drag from about Nov 17 it has been my go to regulated device and favourite (vapesmarter custom mods excluding) so this Drag 2 had a lot to live up to.
So lets dive in....
The Drag 2 has had a slight body design change to be more like the Voopoo too in the fact that the middle is actually wider than the sides and the 510 is more centrally located allowing for bigger tanks/drippers to be used.
It measures 88.3x51x26.5mm at its widest points allowing for a much bigger atty before any noticeable overhang.
My original Drag had overhang off the Drop and it sits loverly on here. The only thing is the raised 510. It didn't really bother me cos unless you look straight on like this I did not even notice.
This mod comes in 8 different colours
I gave been playing about with the FIT modes and they seem quite good, from what i believe the mod measures your coil and works out what it believes to be the best settings then gives you a reduced power to save battery life, a medium power for the flavour chasers and a high power for the cloud chuckers. Or if your like me back to the wattage mode.
I used the UFORCE tank for about 5 days and its a good tank i suppose. I'm an RDA guy so not mega sure on tanks but it chucked some clouds and flavour was OK. Absolutely no signs of any leaking and filling was a doddle.
After the five days on went the Drop Dead and that's when this thing started to sing. Up went the power and on came the nice moist warm vape I like. This thing never missed a beat. It preforms just as amazing as the original drag but feels more comfy in the hand. Gone are the sharp box corners of the first model. The battery door has a little rattle but not enough to put me off.
Darn it forgot the fucking packaging lol.
Packaging is your stylish simple packaging with your usual spares like orings and spare glass as the tank came with a bubble glass fitted so the normal straight one was in there. Instructions and warranty cards are there too.
The mod has all its usually safety features (5 clicks on and off and all that jazz) but voopoo have built on this by making their new FIT chip fireproof and water resistant.
Right some pros and cons.....
Pros
Right so first up thank you @VOOPOO for giving me the chance to review this kit. Since owning the Original Black Resin Drag from about Nov 17 it has been my go to regulated device and favourite (vapesmarter custom mods excluding) so this Drag 2 had a lot to live up to.
So lets dive in....
The Drag 2 has had a slight body design change to be more like the Voopoo too in the fact that the middle is actually wider than the sides and the 510 is more centrally located allowing for bigger tanks/drippers to be used.
It measures 88.3x51x26.5mm at its widest points allowing for a much bigger atty before any noticeable overhang.
My original Drag had overhang off the Drop and it sits loverly on here. The only thing is the raised 510. It didn't really bother me cos unless you look straight on like this I did not even notice.
This mod comes in 8 different colours
I gave been playing about with the FIT modes and they seem quite good, from what i believe the mod measures your coil and works out what it believes to be the best settings then gives you a reduced power to save battery life, a medium power for the flavour chasers and a high power for the cloud chuckers. Or if your like me back to the wattage mode.
I used the UFORCE tank for about 5 days and its a good tank i suppose. I'm an RDA guy so not mega sure on tanks but it chucked some clouds and flavour was OK. Absolutely no signs of any leaking and filling was a doddle.
After the five days on went the Drop Dead and that's when this thing started to sing. Up went the power and on came the nice moist warm vape I like. This thing never missed a beat. It preforms just as amazing as the original drag but feels more comfy in the hand. Gone are the sharp box corners of the first model. The battery door has a little rattle but not enough to put me off.
Darn it forgot the fucking packaging lol.
Packaging is your stylish simple packaging with your usual spares like orings and spare glass as the tank came with a bubble glass fitted so the normal straight one was in there. Instructions and warranty cards are there too.
The mod has all its usually safety features (5 clicks on and off and all that jazz) but voopoo have built on this by making their new FIT chip fireproof and water resistant.
Right some pros and cons.....
Pros
- Finish and paint feel improved from the first mod
- Accommodate up to 26mm attys
- Improved battery life
- Higher max wattage, up to 177W
- Smaller and lighter than the originalg
- Innovative GENE FIT chip with 3 FIT modes
- Kit comes with UFORCE tank with matchy matchy drip tip
- A little rattle on battery door (not a con for me but will be for others)
- The grove cutout along the front annoyed me a little as that's where my finger naturally falls when firing and its a little sharp