WANTED: People for testing our new device

[JAC Vapour]

I've had a major issue with the first .7 coil. Performance is fantastic. Much better suited to me personally than the 1ohm MTL coil. But after 1 full day of use the coil became practically unusable. The cotton has swelled so much it's totally chocked off the airflow. I started off vaping with the bung in place. I then had to remove it as it was just too restricted. It's become so tight now even without the bung that when I try to draw on it my cheeks get sucked in from the force necessary. I like a tight draw but this has gone waaaay beyond that. Gonna swap it for the second coil and see what happens. Curious if anyone else has had this issue with the turbo coils or if it's just me with an unlucky coil.

It sounds like the cotton has got dragged over the airflow, it shouldn't happen, but you can fixe by taking the pin off the bottom and pushing in something under 2mm, down the centre of the coil, a toothpick normally works.

 

[JAC Vapour]

There is a review on the JacVapour site with someone having had the same issue. Would be interesting to know if it’s a QC issue or if certain juices thicken up the cotton too much. I’ve been using my 0.7 coil non stop since around 10pm Friday. I’ve put about 10ml of dinner lady nic salts through it and up to know have had no issues although the flavour is starting to drop off a bit now.

It is basically the fact the coil is tiny, and getting and the cotton can be dragged over the centre airflow, as production ramps up of these the assembly line get better at producing them, and we point any issues like this out to pay particular attention to, obviously a customer would get these replaced free of charge if they weren't happy and it shouldn't happen too often.

 

[kriskent]

You can switch the pin from the other when it's dead, it juts pushes in.

I realised that they just push in last night, I've never used a coil that does this so though it was knackered. Thanks, will swap them over when this one dies

 

[shale84]

Can we use SERIES-S TF Mouth Tip with VIM?

 

[JAC Vapour]

Can we use SERIES-S TF Mouth Tip with VIM?

No it has it's own mouth tips for sale, basically the same options as the S TF stuff, but it's a different size and design

 

[Mitz]

There is a review on the JacVapour site with someone having had the same issue. Would be interesting to know if it’s a QC issue or if certain juices thicken up the cotton too much. I’ve been using my 0.7 coil non stop since around 10pm Friday. I’ve put about 10ml of dinner lady nic salts through it and up to know have had no issues although the flavour is starting to drop off a bit now.

It sounds like the cotton has got dragged over the airflow, it shouldn't happen, but you can fixe by taking the pin off the bottom and pushing in something under 2mm, down the centre of the coil, a toothpick normally works.

So I've switched it out for the second coil I had. Gave it a cycle thru the ultrasonic, put a fat sewing needle down the middle and put it to dry. Will see how the second coil goes then swap back.

Using 50/50 juice with an extra squirt of pg 50mg.

I'm certainly not complaining in any way whatsoever. Just thought it was feedback worthy of mentioning.

 

[JAC Vapour]

So I've switched it out for the second coil I had. Gave it a cycle thru the ultrasonic, put a fat sewing needle down the middle and put it to dry. Will see how the second coil goes then swap back.

Using 50/50 juice with an extra squirt of pg 50mg.

I'm certainly not complaining in any way whatsoever. Just thought it was feedback worthy of mentioning.

absolutely, it shouldn't happen and it shouldn't happen a lot, thanks for letting me know.

 

[bellyman]

absolutely, it shouldn't happen and it shouldn't happen a lot, thanks for letting me know.

I had the same with my first 1ohm coil.
The first day it was 'tight' and the second day it was like trying to suck a McDonald milkshake through a straw.
The second coil was perfect.

 

[shale84]

No it has it's own mouth tips for sale, basically the same options as the S TF stuff, but it's a different size and design

Is it for sale yet because I can't find it

 

[JAC Vapour]

Is it for sale yet because I can't find it

absolutely, it shouldn't happen and it shouldn't happen a lot, thanks for letting me know.

the mouth tips are not up yet, they will be up later today, they are juts sorting out an issue with the listing