What's new

Welcome ALL Squonkers!!

Old Grump said:
I use the Wraith Squonker by Council of Vapes which I found on Fastech. If I remamber correctly I paid about $55 AUd all up incl EMS freight. This I married to a Tsunami 24 (genuine). This I purchased locally. Cannot fault it and it did not break the bank. The only con I will give it is the manual was somewhat difficult to understand but once sorted its great.
Click to expand...
Try teaming that wraith up with the hadaly. Looks great and you can get an awesome vape plus descent battery life with a 0.5 build. I use that combo for out and about.
 
mannikon said:
ok, thanks both!

edit: was on one of my wish lists at FT!
Click to expand...
Good to have a stock of those as they seem to fit most conversions. If you have too much legnth use an angle grinder to remove excess (a cheap hacksaw works just as well as they are a soft metal). If I'm using the rda at home I don't bother as I like a little juice well.
 
eyeball kid said:
Try teaming that wraith up with the hadaly. Looks great and you can get an awesome vape plus descent battery life with a 0.5 build. I use that combo for out and about.
Click to expand...

Hadaly works very well with the wraith! Hadaly is a great dripper and squonker and agree wholeheartedly with a simple flavour coil around 0.5 is perfect!
Needs a decent drip tip of course ...

2017-01-29 three hadaly.jpg


eyeball kid said:
Good to have a stock of those as they seem to fit most conversions. If you have too much legnth use an angle grinder to remove excess (a cheap hacksaw works just as well as they are a soft metal). If I'm using the rda at home I don't bother as I like a little juice well.
Click to expand...

Angle grinder - eek! I know what you mean, they are soft so should be easy to shape in straight through hollow pins but have noticed some bf pin(s) - forgotten which - think it is the Maze pins - that have a solid top with juice holes at the sides. Look forward to see your Mad Dog conversion!!
 
Anyone else intrigued by the geek vape medusa. If this can be squonk converted it would be as handy as the split in having a small reservoir and the actual top section looks like the rda the goon lp could have been without the enormous coil deck.
 
eyeball kid said:
Anyone else intrigued by the geek vape medusa. If this can be squonk converted it would be as handy as the split in having a small reservoir and the actual top section looks like the rda the goon lp could have been without the enormous coil deck.
Click to expand...

I am now you've pointed it out fella.

Looks like it could be converted no probs.

I might give it a go next pay check.

cheers

Gaz
 
Hey, I'm now officially a squonker! I made my first coil (only barely sub ohm as I wanted to try Spiritwalker Chiricahua on a lower wattage than my tank stock coils allow) then spent all afternoon (it felt like) to understand the CoV Wraith's menu.

Anyway I did it!!!

Rookie mistake #1 cut the cotton against the grain initially. Ha ha.

The next step is to bottom feed convert a Sapor I got in a sale but I'll save that for another day. I used the supplied atty in case I destroyed it on my first attempt. I should have had more faith as I've watched a gazillion videos and built on a 521 tab.
Woo hoo me.
 
eyeball kid said:
It's on the way b,c. But I'm behind on my squonk testing.
Click to expand...

It's FT being too quick now, I may have to complain, used to be able to rely on them taking four weeks so stuff came through in a dribble, now it's all coming in at once, log jam time :11:
 
You must log in or register to reply here.

Similar threads

M
Armor mech squonker, parts? Or how to repair?
Replies
9
Views
220
Mbsun
M
f0rdy
Seasoned vaper
2
Replies
13
Views
731
f0rdy
f0rdy
T
Big thanks to Genghis Fogs
Replies
4
Views
719
vapervince
V
N
Newbie here
Replies
3
Views
677
hack400
hack400
itscostingme
Attention squonkers
2
Replies
10
Views
1K
itscostingme
itscostingme
Back
Top Bottom