What build do you have in your Boro?

[Deleted member 54254]

Fiddly wee plastic inserts, fuck that noise.

 

[Diagrammatiks]

ok ok

 

[Diagrammatiks]

One of these is running a caliburn 0.8 rebuild coil stretched out at 0.8 ohms

the other one is running a literal piece of ss316 food grade screen filter at .1 ohms.

Still waiting on the mecha rba.

 

[JohnNada]

@Diagrammatiks

They look amazing!

1. How much did you pay for them?
2. How is the flavour?
3. Have you got any OFRF strips to try?
4. How's airflow/condensation with the panels fitted?

 

[Diagrammatiks]

@Diagrammatiks

They look amazing!

1. How much did you pay for them?
2. How is the flavour?
3. Have you got any OFRF strips to try?
4. How's airflow/condensation with the panels fitted?

Alright...first off the deck and airflow of this version of the Ponte is not meant for mtl or low wattage vaping. The deck is too long for any purchasable mesh strips. Joel also vapes at around 40 watts. The way that the airflow works currently you really only have loose and looser as your choices.

If you use the bridge for its intended purpose there is very little condensation. big rdl or dl draw.

now if you are me you can mcguyver some low wattage strips in here...but the airflow needs a different insert. I've talked to them about it and hopefully they'll release something later. At this point I'm about to 3d print some inserts for myself.

The atemporal is much better for mtl. /it gets much tighter then the Ponte.

Flavor is really good though. It's just a little profile rda.

They are about 60 dollars usd each.

 

[JohnNada]

Alright...first off the deck and airflow of this version of the Ponte is not meant for mtl or low wattage vaping. The deck is too long for any purchasable mesh strips. Joel also vapes at around 40 watts. The way that the airflow works currently you really only have loose and looser as your choices.

If you use the bridge for its intended purpose there is very little condensation. big rdl or dl draw.

now if you are me you can mcguyver some low wattage strips in here...but the airflow needs a different insert. I've talked to them about it and hopefully they'll release something later. At this point I'm about to 3d print some inserts for myself.

The atemporal is much better for mtl. /it gets much tighter then the Ponte.

Flavor is really good though. It's just a little profile rda.

They are about 60 dollars usd each.

Thanks for the info.

I'm definitely only interested in it for RDL/DL purposes as there are a million other bridges for MTL. I basically just want the Unity in an AIO.

I was under the impression that the OFRF strips would fit since its basically a Profile deck.

60USD seems reasonable, but I expect that will be means it's around 70-80GBP when released here.

 

[Diagrammatiks]

Thanks for the info.

I'm definitely only interested in it for RDL/DL purposes as there are a million other bridges for MTL. I basically just want the Unity in an AIO.

I was under the impression that the OFRF strips would fit since its basically a Profile deck.

60USD seems reasonable, but I expect that will be means it's around 70-80GBP when released here.

orca told me that Joel uses the nexmesh chill which is basically the same size I think? the deck is smaller than the profile for sure.

 

[JohnNada]

orca told me that Joel uses the nexmesh chill which is basically the same size I think? the deck is smaller than the profile for sure.

The Wotofo nexMesh Chill, Extreme and Turbo mesh strips are 17x8.5mn and designed for the Profile v1.5 RDA and Profile RDTA.

They're a little bit bigger than the OFRF nexMesh strips which are 16x6.8mm and designed for the Profile v1 RDA, Profile M RTA and Profile Unity RTA.

Vandy Vape Kylin M/M Pro mesh strips are also 16x6.8mm, same with Damnvape Doom and BMTD strips.

Steam Crave make them in both of the above sizes.

GeekVape Zeus X Mesh strips are 18x6mm.

There's also the Vandy Vape mesh spools which you can cut to size.

There's more, but that's all I can think of right now.

The 0.13ohm A1 OFRF strips are my favourite in the Unity and M Pro. I can send you a couple to try if you like? I have 30 arriving next week.

 

[Diagrammatiks]

The Wotofo nexMesh Chill, Extreme and Turbo mesh strips are 17x8.5mn and designed for the Profile v1.5 RDA and Profile RDTA.

They're a little bit bigger than the OFRF nexMesh strips which are 16x6.8mm and designed for the Profile v1 RDA, Profile M RTA and Profile Unity RTA.

Vandy Vape Kylin M/M Pro mesh strips are also 16x6.8mm, same with Damnvape Doom and BMTD strips.

Steam Crave make them in both of the above sizes.

GeekVape Zeus X Mesh strips are 18x6mm.

There's also the Vandy Vape mesh spools which you can cut to size.

There's more, but that's all I can think of right now.

The 0.13ohm A1 OFRF strips are my favourite in the Unity and M Pro. I can send you a couple to try if you like? I have 30 arriving next week.

my bad the ponte is 75-80. The Atemporal was 60. The mecha was 45.

I’m good on mesh thanks. I have so much high wattage. Mission now is to cut a strip that vapes well at 15 watts.

 

[nwhornet]

The Ponte takes 16x6.8mm mesh, 60mm cotton wick. A Unity in Boro form.