Why dont I get the same vape?

[greenbrucelee]

I dont know maybe its the atty and not the mod. I have heard people say some attys dont work well in TC although I dont know how thats possible.

 

[Simon G]

the only difference that stands out to me is that it looks like the 'C' is making more calculations and changes but the result looks pretty similar ...

nothing is jumping out but that 'table top' section in the second pic looks a bit odd.

 

[greenbrucelee]

I'm not sure whats going on, whether its the atty or how the C is working,

 

[nwhornet]

Check the mod resistance & compare between the 2. The default setting on one or the other could be way out. Unless you've got the tool to test this, do a search on Evolv forums for resistance for both mods.

 

[greenbrucelee]

Check the mod resistance & compare between the 2. The default setting on one or the other could be way out. Unless you've got the tool to test this, do a search on Evolv forums for resistance for both mods.

My DNA 250 says Mod resistance is 0 ????? in escribe My DNA 250c comes out at 0.004 (have seen that others on the evolve forum say it should be 0.009

 

[nwhornet]

My DNA 250 says Mod resistance is 0 ????? in escribe My DNA 250c comes out at 0.004 (have seen that others on the evolve forum say it should be 0.009

Use either the 0.004 or 0.009, both should work fine. It will mean the mod can make the adjustments properly. On the 250 it's having to guess at it. I find a little variation if I swap between mods but nothing that a few degrees up or down wont fix.

 

[greenbrucelee]

On evolve many people using the plug to read the resistance say from aroumd 0.004 to 0.0010 for the finder

 

[nwhornet]

On evolve many people using the plug to read the resistance say from aroumd 0.004 to 0.0010 for the finder

Hence why I said use either the low or high figure (or anything inbetween). 0.???? just means no resistance entered when the manufacturer set the mod up. All mine are set at an average taken from the results on Evolv as can't be arsed searching down the copper plug.

 

[greenbrucelee]

I have changed them both to 0.009 but no difference. I just had a thought though, I never had this issue with higher ohm coils such as the 0.15 aliens I had.

 

[marcus68]

i gave up using my think vape finder dna250c as it has to many problems including check atty error while trying to vape i think they are flawed .. my mirage dna75c works perfect in comparsion ..