X CUBE II V1.094 FIRMWARE upgrade

[choolsy]

I have just checked to see if there was a firmware upgrade for the x cube II and there is (even though the site still shows 1.093.)
x-cube-two-firmware-upgrade-guide

The main thing I've noticed so far is much smoother temp control on SS giving me a much better vape, I would say it's well worth upgrading to this. I didn't like the way it noticeably cut out when hitting temp before and this upgrade has really improved it.

 

[norwegianvaper]

I don`t get this mod. If I choose TC, lets say SS mode, and go to steam engine, and I dial in the numbers for a ss 316L coil. Then steam engine say "The wire you have built has a resistance factor of 1.1758 at this temperature." or "
TC precision 387" But on the SMOK X Cube II, the options are between 0.00050 and 0.00200. How can I set it right for my wire then? On my DNA's there is no need for adjusting any value, just choose the wire and download it to the mod. With the XCube, I have to use try and error method. And the vape on the DNA's feels so much better to, even after I upgraded it to the 180 W version 1.093

 

[crustyfolker]

I don`t get this mod. If I choose TC, lets say SS mode, and go to steam engine, and I dial in the numbers for a ss 316L coil. Then steam engine say "The wire you have built has a resistance factor of 1.1758 at this temperature." or "
TC precision 387" But on the SMOK X Cube II, the options are between 0.00050 and 0.00200. How can I set it right for my wire then? On my DNA's there is no need for adjusting any value, just choose the wire and download it to the mod. With the XCube, I have to use try and error method. And the vape on the DNA's feels so much better to, even after I upgraded it to the 180 W version 1.093

as supplied by @smoggie

Ni200: 0.00620

Ti01: 0.00350

SS316L: 0.00092

SS316: 0.000915

SS317L: 0.00088

SS317: 0.000875

SS304: 0.00105

SS430: 0.00138 (shouldn't be dry burned very very hot as it becomes brittle at very high temperatures but a standard dry burn is no problem)

SS410: 0.00155

NiFe30: 0.00320

Tungsten: 0.00450

Platinum: 0.00392

Nichrome: 0.00040

Gold: 0.00340

Iron: 0.00500

 

[crustyfolker]

I don`t get this mod. If I choose TC, lets say SS mode, and go to steam engine, and I dial in the numbers for a ss 316L coil. Then steam engine say "The wire you have built has a resistance factor of 1.1758 at this temperature." or "
TC precision 387" But on the SMOK X Cube II, the options are between 0.00050 and 0.00200. How can I set it right for my wire then? On my DNA's there is no need for adjusting any value, just choose the wire and download it to the mod. With the XCube, I have to use try and error method. And the vape on the DNA's feels so much better to, even after I upgraded it to the 180 W version 1.093

Forgot to mention firmware 1.98 is the latest