Xcube 2 help

[VaperAtton]

Hi this is my first post on this forum so hi to all. I have been vaping for about 6 month and just bought an xcube 2 and having problems already and want to know if anyone else has same issues. For starters the buttons rattle alot and the battery cover seems strange, the top magnet seems to push the cover away rather than attract it whereas the bottom one attracts it, if that makes sense if you could check yours, any help would be grateful because it didn't come cheap with the tfv4 cheers.

 

[stuartd]

there is nothing you can do about the rattley buttons and the magnets are a weird one when i had mine it didnt do that it didi move around abit when you were vaping

 

[MrDJ]

hi and welcome to the planet.
both mags pull the same for me so no issue there.
yes theres a rattle but a lot of mods do that. nothing to worry about.

 

[Pedaldog]

Magnets fine on mine too. Not noticing a lot of rattling on the switches either.

 

[Enoch]

It sounds like a dodgy made xcube if the magnets repel on it.

Where did you buy it from?

Doesn't necesserily mean there is anything sinister, if the wrong magnet has been added for example then it could just be a build flaw.

 

[Foggy Bob]

You can buy silicone sleeves for the X cube 2 now. That would at least help with your battery cover issue.
My magnets are all the right way round so it does seem like you may have one with a quality issue.
If they are glued in you may be able to use a soldering iron to melt the glue enough to remove the magnet.
However be careful if you do id suggest trying the leave the battery door on a warm radiator for a few hours and see if they become loose? Id not want to put extra heat on the mod itself.
If they did loosen up you might be able to turn the magnet round and then leave it to cool down. The glue should harden up again.

Try it at your own risk though, I'm not sure if the magnets are press fit or glued.

 

[Fellowgecko]

I'll send you a silicon sleeve if you need it in the meantime, I have 3 that I don't use.

It does sound like the wrong magnet has been put in one of the slots