A Panegyric to @Stealthvape & Niffy the Wonder Wire...

[Tubbyengineer]

Informative thread Tubs,so unless I have missed it which guage did you opt for,the 28?

I took all three...

I've use the 28 & 26 for single and dual coils both spaced and micro - although it seems better not to squeeze the wire with ceramic tweezers while it's glowing as you can get wraps fusing together, usually the outermost two. I've started to do it the old fashioned way of firing then a gentle squeeze as it cools like we used to do with metal tweezers. Tonight or tomorrow I'll use the 29ga to construct the infamous twisted microcoil as I really want to see how it behaves since it worked so well with nickel...

As a guide if you can build a coil with Kanthal the two thicker wires will do for just about everything - although the 26 might be more use for singles and the 28 for duals...

 

[u8myufo]

I took all three...

I've use the 28 & 26 for single and dual coils both spaced and micro - although it seems better not to squeeze the wire with ceramic tweezers while it's glowing as you can get wraps fusing together, usually the outermost two. I've started to do it the old fashioned way of firing then a gentle squeeze as it cools like we used to do with metal tweezers. Tonight or tomorrow I'll use the 29ga to construct the infamous twisted microcoil as I really want to see how it behaves since it worked so well with nickel...

As a guide if you can build a coil with Kanthal the two thicker wires will do for just about everything - although the 26 might be more use for singles and the 28 for duals...

Thanks mate,I have just gone back to using a TC build after a break.Did a dual coil with .25 in the Goblin mini,hitting rather well to be honest,but will give this stuff some thought for my next purchase.

 

[Tubbyengineer]

Thanks mate,I have just gone back to using a TC build after a break.Did a dual coil with .25 in the Goblin mini,hitting rather well to be honest,but will give this stuff some thought for my next purchase.

Just completed a Twisted Niffy mictocoil in the Heron, testing it now with Some Medusa Juice - Choas (Primeval Void), Took a slightly different approach and cooked this coil off slowly under TC at Max Celsius (350 on the snow wolf) until it did nothing but sit there being hot. Now getting some pretty serious flavour (Although it is a 70% PG juice) but at £8 for a 30ml dropper it's decent value...

 

[u8myufo]

Just completed a Twisted Niffy mictocoil in the Heron, testing it now with Some Medusa Juice - Choas (Primeval Void), Took a slightly different approach and cooked this coil off slowly under TC at Max Celsius (350 on the snow wolf) until it did nothing but sit there being hot. Now getting some pretty serious flavour (Although it is a 70% PG juice) but at £8 for a 30ml dropper it's decent value...

Sounds good Tubs, I think I may do a single TC build with mesh in the RSST in a mo

 

[danb]

I don't know if it is just my imagination, but this stuff seems much more stable than Ni. With Ni I always have to adjust 5-10 C every time I pick it up, but NiFe30 has been smooth and consistent at 210C all day

 

[Tubbyengineer]

I don't know if it is just my imagination, but this stuff seems much more stable than Ni. With Ni I always have to adjust 5-10 C every time I pick it up, but NiFe30 has been smooth and consistent at 210C all day

I'm having a great deal of fun with a twisted microcoil in my Viggo, I'm trying to vape Medusa juice "Hades", But I'm getting so much flavour it's like trying to vape Napalm in a nice cinnamony sort of way...

 

[gscott1979]

Hi can anyone help me out I'm trying to download the csv file for the Stealthvape niffy wire but all it does is put me to another white page with the csv on it but doesn't actually download it not sure where I'm going wrong [emoji17]

 

[Tubbyengineer]

Hi can anyone help me out I'm trying to download the csv file for the Stealthvape niffy wire but all it does is put me to another white page with the csv on it but doesn't actually download it not sure where I'm going wrong [emoji17]

OK, Go to the wire wizard, select Nife30 (Stealthvape) in the boxes to the left, then click on the DNA200 box to the right, That should bring up a box underneath the table saying download TFR table as CSV.Click on that and it will download, Then you can load that into EScribe using the Custom material in one of the profiles...


Wire Wizard | Steam Engine | free vaping calculators

 

[gscott1979]

OK, Go to the wire wizard, select Nife30 (Stealthvape) in the boxes to the left, then click on the DNA200 box to the right, That should bring up a box underneath the table saying download TFR table as CSV.Click on that and it will download, Then you can load that into EScribe using the Custom material in one of the profiles...


Wire Wizard | Steam Engine | free vaping calculators

Cheers Tubbyengineer unfortunately that's the exact steps I've been following but for some reason it just goes to a blank webpage with the csv file on it without downloading it,I've tried it 5 times now with no success [emoji37]

 

[Tubbyengineer]

Cheers @Tubbyengineer unfortunately that's the exact steps I've been following but for some reason it just goes to a blank webpage with the csv file on it without downloading it,I've tried it 5 times now with no success [emoji37]

Ah, it might be your browser which one? Chrome or Edge?