All gone wrong help freak show mini

[Gravelthroat]

Looks like the coil is touching the deck an there is some rather large legs stickin out there m8

 

[jammy b]

Step one

Resistence is going up when firing

 

[jammy b]

Step one

Looks like the coil is touching the deck an there is some rather large legs stickin out there m8

I clipped them down glow isnt even

 

[jammy b]

Its now saying check atomizer

 

[Gravelthroat]

Do u have an ohms reader? Is everything screwed down tight an is the coil touching the airflow?

 

[cloudcuckoo]

Indeed, just try tugging the coil up a few mm.

 

[city461]

Chuck a piccie up dude let us have a look, sound advice already been given. Its nowt that can't be fixed.

Dude? I think shes a doris...

 

[9668harry]

Yep, as already said, looks like your coil is touching the deck and is subsequently shorting out, the coil/coils need to be lifted and clear of the actually body of the deck, 2-3mm above should do it. The only places the coil should touch the deck/atty is, one leg in negative post and one leg in the positive post.

 

[Moley]

Could do with a shorter negative leg, could try loosen it push the coil back and lift with a driver/mandrel and retighten, snip and pinch/pulse.

 

[9668harry]

Ignore the type of coil but this image shows good coil position on the freakshow. Notice the gap between the bottom of the coil and the deck. That's what your after.