All gone wrong help freak show mini

[Clownstyle]

Right I finally got a nice glow everything looking nice and neat but resistance is at 3.4 is this to high to vape at?any ideas on how to lower it

How many wraps and what gauge / type of wire are you using?

 

[jammy b]

How many wraps and what gauge / type of wire are you using?

They are premade 27 gauge and should be 1.ohm

 

[Clownstyle]

They are premade 27 gauge and should be 1.ohm

Make sure they are making a good connection where they screw into the posts. Also, can you see if your 510 pin under the freakshow is loose?

 

[jammy b]

If the the coil is 1 ohm then it should read around 1 ohm. The only thing I can think of is a short. Make sure the screws are tight and the coil isn't touching the deck. You said they were pre made coils, where did you get them from?

Got from redjuice

 

[jammy b]

Make sure they are making a good connection where they screw into the posts. Also, can you see if your 510 pin under the freakshow is loose?

Its reading at 2.18 is this ok

 

[Clownstyle]

Its reading at 2.18 is this ok

It's a bit high considering they are meant to be 1ohm coils! It must be these ones you have,

https://redjuice.co.uk/parts-and-ac...-coils-x-10-bag-a1-kanthal-gauge-options.html
0.35mm / 27AWG - 1.0 Ohm - Coil Inner Diameter = 3mm

3mm coil is a bit big for the freakshow, think I normally do 2.5mm max... Although I could be wrong, need to check when I get home from work

 

[EmbraSewerRat]

Its reading at 2.18 is this ok

Nope, still more than twice what you should expect.

Might sound daft, but did you scrub out the atty when you got it? and by scrub out i mean strip ALL the screws out and get a toothbrush into the post holes?
I had a similar issue with a fast tech clone and the problem was a wee swatch of metal in the post holes. Worth investigating.

 

[jammy b]

It's a bit high considering they are meant to be 1ohm coils! It must be these ones you have,

https://redjuice.co.uk/parts-and-ac...-coils-x-10-bag-a1-kanthal-gauge-options.html
0.35mm / 27AWG - 1.0 Ohm - Coil Inner Diameter = 3mm

3mm coil is a bit big for the freakshow, think I normally do 2.5mm max... Although I could be wrong, need to check when I get home from work

Yes there the buggers

 

[jammy b]

Nope, still more than twice what you should expect.

Might sound daft, but did you scrub out the atty when you got it? and by scrub out i mean strip ALL the screws out and get a toothbrush into the post holes?
I had a similar issue with a fast tech clone and the problem was a wee swatch of metal in the post holes. Worth investigating.

No I havent done thats I need everyone to come to my house

 

[EmbraSewerRat]

No I havent done thats I need everyone to come to my house

Of course, you use someone elses toothbrush!!
If you can get the 510 screw out of the bottom as well and give that a good swab too.
If the scrubbing out doesna work, then you might have to have visitors.