Battery for my Mod Build

[Audiopsyence]

More power?

 

[sampit]

Just finished a SX 300 box mod build with two Dinogy 2250 mAh 30c lipos
Total 4500 mAh chain vaped it all day at 20w still only at 4.0v
Look after lipos and they look after you never run then down below 3,4v never had a lipo fire in over 4 years
Lipos have improved over the past few years

 

[robski]

Just finished a SX 300 box mod build with two Dinogy 2250 mAh 30c lipos
Total 4500 mAh chain vaped it all day at 20w still only at 4.0v
Look after lipos and they look after you never run then down below 3,4v never had a lipo fire in over 4 years
Lipos have improved over the past few years

Thanks sampit
I'm not 100% sure but I think the sx300 / sx350 chips power down when the battery voltage drops below 3.2 volts. More than happy to be corrected on this if it's not correct. So, do you run the battery until the mod shuts down or do you shut it down yourself earlier?
Not even built my first mod yet but trying to get all the info straight in my head first!

 

[sampit]

I just shut it down and charge m8
But your right I will shut down itself The Sx has battery monitor and sag bar
I have another SX300 mod with a new Aw 2000 mAh battery in it and sags loads on the meter even at 8w crap.
Just putting a Sony cvt5 in it now
The lipo one never sags even a mental 26w no sag so fare at 3.98v
Vaping great at 17w and Instant power up
Quality Lipos all the way for me.

 

[sampit]

Scary taking a 30c 3s cell to bits for the first time piss easy now
My tip 80w soldering needed.

 

[sampit]

Just looked back at your pack 1s2p nice! that will be fine m8

 

[robski]

Thanks sampit
That battery pack was chosen as it's a single cell pack with a high discharge potential.
By the sound of it the sx300 / 350 chips display some pretty useful info.
Are you finding the 'tilt' menu system ok to live with?