Custom drip tips - £10 posted.

[Lee]

too exciting|!

Thought I’d check it out before I sat down and had a beer, sure enough it fell right out the mould with a gentle tap [emoji16]

 

[Simon G]

Thought I’d check it out before I sat down and had a beer, sure enough it fell right out the mould with a gentle tap [emoji16]

View attachment 172549

ohh, that looks like it worked a treat ... top job, great thinking too.

 

[nwhornet]

Which size tip is on the Glas mate?

Supposed to be 810 but the 810 I got doesn't sit properly, tad high. Without the O ring, it falls out. The stock tip fits nealy all my other atties. It's a strange set up, O ring at the top of the chimney & 2 on the drip tip (thin). It's no biggie as plenty others to put it on.

 

[Lee]

Supposed to be 810 but the 810 I got doesn't sit properly, tad high. Without the O ring, it falls out. The stock tip fits nealy all my other atties. It's a strange set up, O ring at the top of the chimney & 2 on the drip tip (thin). It's no biggie as plenty others to put it on.

Yeah just had a look then, can see the oring inside of the cap. Does the tip you bought fit in your other 810 atties?

If it’s just the length of the base that’s too long, will happily take a bit off for you if you want to send me it with the top cap mate? You could probably rub it on a file if it was only slightly too long!

 

[Simon G]

I had to do that with the tips I put in my hastur mini's as it has a really shallow pocket .... I used a flat board with some wet and dry paper on it and just sanded them down with that.

 

[Lee]

I had to do that with the tips I put in my hastur mini's as it has a really shallow pocket .... I used a flat board with some wet and dry paper on it and just sanded them down with that.

Yeah as a whole the majority of tanks are much more shallow than the RDAs, I try to cut them to fit both but some tanks are very shallow!

Very easy to file or sand though like you say, bit of sand paper or even a nail file would do the job

 

[nwhornet]

Yeah just had a look then, can see the oring inside of the cap. Does the tip you bought fit in your other 810 atties?

If it’s just the length of the base that’s too long, will happily take a bit off for you if you want to send me it with the top cap mate? You could probably rub it on a file if it was only slightly too long!

Both tip bases are the same length. The O rings on the stock chimney are thin but sit either side of the chimney if that makes sense. Fits most others except the Shermans & VMCT2. Not bothered about the Sherman as like the Cone style tips. As I said no biggie Lee.
I may well be in touch about tips for the Supreme as that's a nice shape, not everybodys favourite but he ho.
Thanks for you help as always.

 

[Lee]

Both tip bases are the same length. The O rings on the stock chimney are thin but sit either side of the chimney if that makes sense. Fits most others except the Shermans & VMCT2. Not bothered about the Sherman as like the Cone style tips. As I said no biggie Lee.
I may well be in touch about tips for the Supreme as that's a nice shape, not everybodys favourite but he ho.
Thanks for you help as always.

Ah ok, looks like a friction fit may be a better fit for that tank then if the stock tip that comes with it only has thin orings on, there isn’t any need for a oring if the tank has a oring on really. Weird how it fits your other tanks but not that one isn’t it!

No worries on the supreme tips, made a couple for @MrTeaTime last week! Cracking atty that is, I think I have every steamcrave made other than the glaz [emoji23]

 

[nwhornet]

Glas is a good tank but not a big coil, big watts style. Considering it's slightly bigger than the Plus it's a more restricted airflow. I enjoy it but it wont be everybodys cup of tea but flavour is up there with the Supreme, especially the postless version.

 

[Lee]

Glas is a good tank but not a big coil, big watts style. Considering it's slightly bigger than the Plus it's a more restricted airflow. I enjoy it but it wont be everybodys cup of tea but flavour is up there with the Supreme, especially the postless version.

Tbh I think there is mixed feelings on most of their tanks isn’t there, but usually the people that follow them tend to find one they like and nothing else compares. I prefer their supreme v1 the 25mm one, wasn’t impressed too much with their 30mm one but Shawn likes his. I still have all of their old school ones too, the good old days sticking the vertical coils in there [emoji23]