Custom drip tips - £10 posted.
- Thread starter Lee
- Start date
Lee
Vendor
- Joined
- Jan 1, 2015
- Messages
- 12,484
I have a little 510 jig I made for the lathe, I tend to make them the same diameter as this if people don’t specify diameter. It’s roughly the same as a regular stock 510. Eg slightly bigger than the connection.
What tanks will you be using them on mate? If you give me a idea I can show you a picture on something similar to gauge the size? 3 of them I haven’t made yet and the one I have made will take a few seconds to adjust. No bother at all to change them at this stage mate
rew
Olympian
- Joined
- May 18, 2016
- Messages
- 39,271
I have a little 510 jig I made for the lathe, I tend to make them the same diameter as this if people don’t specify diameter. It’s roughly the same as a regular stock 510. Eg slightly bigger than the connection.
What tanks will you be using them on mate? If you give me a idea I can show you a picture on something similar to gauge the size? 3 of them I haven’t made yet and the one I have made will take a few seconds to adjust. No bother at all to change them at this stage mate
If it's slightly bigger than the 510, that is perfect. Thanks
Lee
Vendor
- Joined
- Jan 1, 2015
- Messages
- 12,484
Few shots from today! [emoji16]
First, this was the result of the red and black blank I posted up a few days back... this is a extra tall custom kylin rta tip for a Facebook customer.
Then we have a custom midnight purple and jet black vase 510, website order... really enjoyed making this one [emoji16]
Custom blue flake slight taper, 510... Instagram customer....
And the start of a jet black and burnt orange mix to match the Wismec Gen3 dual orange mod, this took some mixing to get this colour right let me tell you that [emoji23]
Looks quite gold on the photos but it looks smack on in person. Looking forward to turning this one.
We also have the start of a custom made squonker that’s due to be in production in the next couple weeks.
First, this was the result of the red and black blank I posted up a few days back... this is a extra tall custom kylin rta tip for a Facebook customer.
Then we have a custom midnight purple and jet black vase 510, website order... really enjoyed making this one [emoji16]
Custom blue flake slight taper, 510... Instagram customer....
And the start of a jet black and burnt orange mix to match the Wismec Gen3 dual orange mod, this took some mixing to get this colour right let me tell you that [emoji23]
Looks quite gold on the photos but it looks smack on in person. Looking forward to turning this one.
We also have the start of a custom made squonker that’s due to be in production in the next couple weeks.
Lee
Vendor
- Joined
- Jan 1, 2015
- Messages
- 12,484
Few shots from today!
This was the result of the custom colour match I posted up the other day, burnt orange with some black to match a Wismec mod.
Then we have another custom mix, taper. There will be some of this blank going on the site too soon, couple left on it. I’m calling this slime green [emoji16] it also has a black pearl pigment added with some fine metal flake in the black part too.
Then we have a custom mix of multiple purples, violet colour flips and pearls. This looks absolutely awesome, almost ultraviolet! This tip isn’t finished yet (a bit soft still) but I could resist posting a shot of this one. This is a super fine 2mm custom bore vase for MTL vaping.
Then we have the start of @Simon G custom mix tip and corolla ring set. More on that later in the week [emoji16]
This was the result of the custom colour match I posted up the other day, burnt orange with some black to match a Wismec mod.
Then we have another custom mix, taper. There will be some of this blank going on the site too soon, couple left on it. I’m calling this slime green [emoji16] it also has a black pearl pigment added with some fine metal flake in the black part too.
Then we have a custom mix of multiple purples, violet colour flips and pearls. This looks absolutely awesome, almost ultraviolet! This tip isn’t finished yet (a bit soft still) but I could resist posting a shot of this one. This is a super fine 2mm custom bore vase for MTL vaping.
Then we have the start of @Simon G custom mix tip and corolla ring set. More on that later in the week [emoji16]
Similar threads
