Dipped to into clones...what do i need now :)

[Miss Pepper]

Hi ya all

Bit of excitement going on today, first my drippers now i have bagged a nemisis clone

So, what do i need to purchase to get them nem up and running?

I know i know you have all put your head in your hands and cried, but i couldnt resist it

All, thought it best to start the thread while im waiting for it.

Havent got loads to spend, managed to find some in OHs jacket

Suggestions please

 

[Blackhack]

Decent Batteries and a decent charger would be a good start....

 

[x19silent79x]

got my charger from MrKraken and its spot on xtar I believe.....

 

[Phantom Diablo]

well you have your drippers and you have your mech. so al you need now is a couple of 18650 batteries ( unless you want to use it smaller so 18500 or 1830 ) they are around £4-6 each. always best to get 2 so one on charge one in the mech. . then a charger.. recommend nitecore charger.. about £15-20 and finally some kanthal wire ( 0.28 - 0.32mm is ideal ) and lastly some unbleached 100% organic cotton wool ( couple of quid from supermarket or health shop or chemists ) and your good to go

 

[Carlos]

good batteries and a good charger I recommend torchy http://www.ebay.co.uk/usr/big_f_d_d if your on UKV he gives discount as well

Mesh-kanthal-silica loads of vendors on here but I use the vape mesh company (i know some will disagree with this)

 

[Tubbyengineer]

You will need...

Batteries: Type depends on what sort of dripping - Do you want to be a Cloud Monkey like Raguri or just normal 1+ohm vaping, for Normal stuff a pair of AW IMR batts in your favourite size, most choose 18350 0r 18650
A charger: Xtar or Nitecore are good ones to start with:
Kanthal wire - get a sampler from Rob stealthvape, you can then find out what you like.
Wick - to start with Silica or Cotton wool
Tools - Nail clippers, small screwdrivers (A set of precision screwdrivers is about £2 from Tesco), Tweezers, a small turboflame lighter/chefs torch/gas cooker, a resistance checker
Youtube - any one of dozens of videos on maling coils and wicks...
Patience - it will go pear shaped a few times, keep a working mod close by to have a vape.
Beer: see above
A dog/child/husband to kick, see patience
A big stupid grin - for when you get it right
Us lot, to laugh at you when it goes pear shaped, then give you way too much advice, the join in the celebrations at the big stupid grin point...

 

[big benson]

More clones!

 

[hodge40]

Subscribed as have my first kit on way and save lookin like numpty :-)

 

[Merino-Teflon]

I'd go with a nightcore charger and efest batteries from myepack, great prices and good gear, get two 18350 and one 18650 battery to start off with, I would say.

Edit: Nipple instead of flat top batteries, more universally loved by mods.

 

[KulrMeStoopid]

good batteries and a good charger I recommend torchy http://www.ebay.co.uk/usr/big_f_d_d if your on UKV he gives discount as well

Mesh-kanthal-silica loads of vendors on here but I use the vape mesh company (i know some will disagree with this)

You dont need to be a member of UKV http://www.planetofthevapes.co.uk/f...-battery-deals?p=227645&viewfull=1#post227645

I get silica and wire from @stealhvape and the quality is so good I don't need to buy a lot of it...ever.