ego vv settings help

[steve english]

can anybody help me with the settings on me new light sabre.
whats the best way to set this thing up, watts and volts wise.
i have found, to high volts = burning tast,
do you start settings low, then adjust up,

 

[ado28]

Start at the lowest setting and work up see here

 

[steve english]

thanks

 

[jimsie33]

What are the ohms of your atomizers? I usually have mine about 3.7v for a 1.8ohm coil and 4.2 for 2.4ohm coil. It's all a bit of trial and error until you find tour sweet spot

 

[steve english]

thanks, the ohms setting says 2.8, and with it set at 4.2, its nice.
what does the watts have to be, or do you use one or the other,to adjust.
and what does the no1 or no2 mean, and what does that do.
i think im getting high just testing the thing.

 

[KulrMeStoopid]

thanks, the ohms setting says 2.8, and with it set at 4.2, its nice.
what does the watts have to be, or do you use one or the other,to adjust.
and what does the no1 or no2 mean, and what does that do.
i think im getting high just testing the thing.

You dont need those wattage numbers if the device youre using is not Variable Wattage.

 

[steve english]

its got variable watts and volts, and another two settings, no1 and no2, not sure what they do.

 

[Markfletcher007]

thanks, the ohms setting says 2.8, and with it set at 4.2, its nice.
what does the watts have to be, or do you use one or the other,to adjust.
and what does the no1 or no2 mean, and what does that do.
i think im getting high just testing the thing.

It's one or the other voltage to control the heat to your atty up and down to your preferred setting and watts when you set it at the exact heat to your atty no matter what ohm you are putting on it, as in set to sweet spot and leave, I prefer Variable voltage as you will find a difference in juices so play around till it feels right for you

 

[steve english]

what does the no1 and no2 do.

 

[ado28]

As Mark says. Everybody has different sweet spots so if you start from the lowest setting then build up you will notice the taste change then when your happy with the taste your good to go. I vape different juices and although my ohm could be the same in different devices I will vape at either a higher or lower voltage/ wattage depending on the juice. I hope that makes sense