K
KulrMeStoopid
Guest
Using .32 Kanthal... I want to go about .8 possibly (My Efest and IMR can handle that right?)
So advice please thanks!
So advice please thanks!
Tubbyengineer
Legend
- Joined
- Aug 20, 2013
- Messages
- 10,602
Watch a video or two - my advice would be not towatch one by Rip Tripper just yet (The man is a tit, but makes good coils). Then sit comfortably and take your time, dont plan on using the first one or two just make them for the practice - Oooh and have a look at the Microcoil tutorial thats on here somewhere, thats good...
RicModMaker
Vendor
- Joined
- Oct 29, 2013
- Messages
- 3,240
If they are high discharge, they will be fine.
Sent from somewhere in Kent.
www.vapechat.co.uk - Vaping chat room
Sent from somewhere in Kent.
www.vapechat.co.uk - Vaping chat room
K
KulrMeStoopid
Guest
I managed a 1ohm straigh from go 
Ill go there for now
Ill go there for now Phantom Diablo
Achiever
- Joined
- Sep 16, 2013
- Messages
- 3,087
microcoils are great. though i tend to do them at 45 degrees and then wrap the cotton around them dragon style blocking the bottom of the coil like this.
this was dual coil 0.7 ohms on efest 18650 , 2000mah battery... really must try one of these on my igo W4
this was dual coil 0.7 ohms on efest 18650 , 2000mah battery... really must try one of these on my igo W4
modestvaper
Postman
- Joined
- Oct 20, 2013
- Messages
- 225
is there any other type? i thought that's the only way! n considering u have been at it so long!
strongylad28
Postman
- Joined
- Nov 11, 2013
- Messages
- 419
Micro coils are by far my favourite. Anything under 1 ohm though I prefer to dual micro coil. I find it gets too hot with just one coil at low ohms.
My advice is take your time, use a 1.5 or 2mm drill bit to wrap around and get as close as you can when first wrapping and there's less faff when squeezing them together when pulsing.
YouTube is by far the best to watch peoples builds.
My advice is take your time, use a 1.5 or 2mm drill bit to wrap around and get as close as you can when first wrapping and there's less faff when squeezing them together when pulsing.
YouTube is by far the best to watch peoples builds.
Phantom Diablo
Achiever
- Joined
- Sep 16, 2013
- Messages
- 3,087
just wait til ya try nano coils wrapped around around a blunt syrnge needle
hard part about nano's is getting the wick right but boy do they heat up quick
hard part about nano's is getting the wick right but boy do they heat up quick
just wait til ya try nano coils wrapped around around a blunt syrnge needle
hard part about nano's is getting the wick right but boy do they heat up quick
I use the cloud method mate after seeing the rip trippers video. The quickest way to change flavour too! Changed all my drippers over to nanos on clouds now
Sent from my GT-I9300 using Planet of the Vapes mobile app
Similar threads
